This page lists companies with one or more products emphasizing the keyword "MicroTCA". Click on any vendor to see a listing of related products. To see all products, click "Expand All".

Sort by: relevance | company
Accolade Technology (1)Flexible, scalable Verilog RTL design block that implements the PICMG SFP.1 I-TDM specifications
Features (see all):

- ASTDM may be used in an ASIC or FPGA for transforming TDM traffic (DS0 data) into I-TDM packets, to be carried over telecom backplanes such as AdvancedTCA and MicroTCA
- Flexible and scalable microsequencer-parser architecture
- Easy integration of new features and scalability from 8 T1/E1 (256 channels) to OC-12 (8K channels)
- The macro is intended for either FPGA or ASIC synthesis, typically using 0.18µ or better geometries
- Complies with AdvancedTCA SFP.0 and SFP.1 (I-TDM)
- TDM formats supported include H.110 and low pincount Telecom Bus
- Generic 32 bit CPU interface, with ring-based DMA for 1ms HMP
- DMA engine supports non-TDM traffic between backplane and CPU
- 125 uS and 1 mS I-TDM modes, with hardware assisted ACK/Activate protocol
- Scalable architecture: the core can be parametrized, using operating frequ [...]


Acme Portable Machines, Inc. (1)Rugged portable MicroTCA platform
Features (see all):

Features (see all):- Integrated with a full-size keyboard and a 15-inch LCD display, the Versa 100 is ideal for anyone who wants to develop, test or demonstrate their applications based on the fool-proof MicroTCA platform without spending too much engineering time, thus reducing development efforts, time to market and total cost of ownership
- The integrated backplane from ELMA provides three mid size AMC and two full size AMC card slots
- The N.A.T. MCH system consists of Freescale ColdFire 547 x 200 MHz CPU, 16 MB of DRAM, 16MB of Flash, GbE at Fabric A with a 2nd GbE uplink, SAS/SATA ports, Clock module with PCIe and serial debug connector
- The Versa 100 MicroTCA Portable platform utilizes Trenton Technology processor card with Intel Core 2 Duo 2.26 GHz processor, 2 GB dual channel DDR3-1066 memory, ADLINK storage card with a 250 GB SATA drive, 15-inch LCD display at 1024x768 resolutions, and a 300 [...]


Actum Electronics (1)Schroff 1U MicroTCA housing
Features (see all):
- MicroTCA system that can accommodate up to six single mid-size AdvancedMC modules in a 19-inch enclosure with a height of only 1U
- Featuring a special case design that ensures efficient cooling of the modules, the MicroTCA system is suitable for use in high-performance multiprocessor systems where rack space may be limited, for example in industrial or transportation applications
- The system provides six slots for horizontal mounting of the AdvancedMC modules, as well as a dedicated slot for a MicroTCA carrier hub (MCH)
- In addition, it is equipped with a special MicroTCA backplane, a built-in power supply and a hot-swap-capable fan tray
- The topology of the MicroTCA backplane has been designed to allow simultaneous use of four different software protocols: GbE, 10 GbE, PCIe and Serial RapidIO
- All AdvancedMC slots are fully compatible with PICMG AMC.0 R2.0, the Advanced Mezzanine C [...]

Adax, Inc. (2)4 x OC-3/STM-1 or 2 x OC-12/STM-4 trunks
Features (see all):
Features (see all):- ATM AAL2 and AAL5 interworking
- Onboard IP to AAL2 & IP to AAL5 interworking
- AAL2 and AAL5 termination and switching
- AMC form factor for next generation AdvancedTCA and MicroTCA platforms
- Uses state-of-the-art Wintegra WinPath2 Network Processor [...]

4 x OC-3/STM-1 or 2 x OC-12/STM-4 trunks
Features (see all):
Features (see all):- ATM AAL2 and AAL5 interworking
- Onboard IP to AAL2 & IP to AAL5 interworking
- AAL2 and AAL5 termination and switching
- AMC form factor for next generation AdvancedTCA and MicroTCA platforms
- Uses state-of-the-art Wintegra WinPath2 Network Processor [...]

ADLINK Technology, Inc. (1)AdvancedMC processor board
Features (see all):
Features (see all):- Core 2 Duo single-width, mid-, full-size
- Intel 3100 chipset
- Single Channel PC3200 DDR2 REG/ECC SODIMM RAM
- Supports a 2 GB single channel PC3200 DDR2 REG/ECC SODIMM RAM and AMC.1 Type1/4 or 8x PCIe x1; AMC.2 TypeE2 (GbE 2x at Port0-1); AMC.3 TypeS2 (SATA 2x at Port 2-3) interfaces
- It fully implements the Advanced Mezzanine Card modular design concept and brings feature-rich processor capabilities to an AdvancedMC carrier board and MicroTCA systems with the appropriate mechanical and electrical connections [...]

Advantech Co., Ltd. (2)The Advantech MicroTCA Carrier Hub UTCA-5503 combines into a single AdvancedMC Module that controls and manages infrastructure and the interconnect fabric resources necessary to support up to 12 AdvancedMCs in a MicroTCA shelf
Features (see all):
Features (see all):- A Primary Gigabit Ethernet fabric on Common Options Fabric A
- MicroTCA
- Carrier Management Controller (MCMC) functions to configure and control the elements
- Where redundancy is required, two MCHs permit the
- Creation of highly reliable systems
- Layer 2 GbE switch for up to 12 AdvancedMC modules on Common Options Fabric A
- MCH update channel for carrier hub redundancy
- Front panel GbE uplink over RJ-45 or SFP
- Pigeon Point based MCMC with direct or switched 10/100 management LAN
- IPMB-0 / IPMB-L for complete carrier management
- Built-in expandability for future pluggable enhancements
- Switch management and extended fabric switching
- Customizable clock module and front panel I/O [...]

The Advantech MIC-5401 is a single-width/mid-size Advanced Mezzanine Card (AMC) designed to support a 2.5" SAS or SATA hard disk drive to work as an enterprise storage module on an AdvancedTCA platform or in a MicroTCA shelf
Features (see all):
Features (see all):- The 2.5" hard disk drive is connected to the AMC port 2 (SAS and SATA) and port 3 (SAS only) according to the AMC.3 specifications
- Dual port SAS drives may be used on the MIC-5401 to increase the interface bandwidth of failover support between dual hosts in fault tolerant environments
- Single-width, mid-size AMC form factor
- SAS or SATA 2.5" hard disk drive compatible
- Hot-swap capable
- AdvancedTCA and MicroTCA compatible
- Dual port SAS drive support
- 3.0 Gbps interface speed support
- Two thermal sensors to monitor onboard temperatures
- Power-on hour counter
- HPM.1 compliant firmware upgrade and rollback support through IPMB [...]

Advantech Corporation (4)The Kit consists of a 6-slot AC-powered MicroTCA chassis including a Core 2 Duo-based Processor AMC, a SAS/SATA AMC with 80 GB SATA hard drive, plus an MCH
Features (see all):

Features (see all):- Core 2 Duo-based Processor AMC + SAS/SATA AMC + MCH
- Booting Linux out of the box [...]


Layer 2 Gigabit Ethernet switch for up to 12 AdvancedMCs on Common Options Fabric A
Features (see all):
Features (see all):- MCH Update Channel for Carrier Hub redundancy
- Front panel Gigabit Ethernet uplink over RJ-45 or SFP
- PigeonPoint based MCMC with direct or switched 10/100 Management LAN port available on front panel
- IPMB-0 / IPMB-L for complete carrier management
- Built-in expandability for future pluggable enhancements
- Switch Management and Extended Fabric switching
- Customizable clock module and front panel I/O
- Compliant with PICMG MTCA.0 R1.0 specification [...]

Advantech's new UTCA-6302 comes with up to 12 of the latest 45nm Intel Core 2 Duo based processors in full-size AMC format for optimal cooling in just a 3U or 4U form factor
Features (see all):
Features (see all):- Innovative front-to-rear cooling scheme
- 12 Full-size Intel Core 2 Duo payload slots and 2 Intelligent MicroTCA Carrier Hubs (MCHs) in 3U
- Advanced redundant power design [...]

Layer 2 GbE switch for up to 12 AdvancedMC modules on Common Options Fabric A
Features (see all):
Features (see all):- MCH Update channel for Carrier Hub redundancy
- Front panel GbE uplink over RJ-45 or SFP
- Pigeon Point based MCMC with direct or switched 10/100 Management LAN port available on front panel
- Shelf and carrier management with OpenHPI support
- Switch Management and PCI Express Fabric switching [...]

Advantech eAutomation Group (1)Advanced Mezzanine Card SAS/SATA Storage AMC
Features (see all):

Features (see all):- Single-width mid-size AMC form factor AdvancedTCA and MicroTCA compatible
- SAS or SATA 2.5" hard disk drive compatible with dual port SAS drive support
- 3.0 Gbps interface speed support
- HPM.1 compliant firmware upgrade and rollback support through IPMB
- Power-on hour counter and two thermal sensors to monitor on-board temperatures
- System management compliant to PICMG3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, and IPMI1.5 [...]


AFORE Solutions (1)Support carrier grade Ethernet, PBT, Any Service/Any Port Pseudowire, and Wireless Backhaul applications enabling the deployment of AdvancedTCA and MicroTCA
Features (see all):

- InterPort Carrier Grade Ethernet modules address the wide range of capabilities required for robust and manageable Ethernet implementations
- Through the utilization of technologies such as MAC in MAC, Q in Q, PBT, QoS, OAM, and Ring protection InterPort allows Ethernet to scale and meet the operational requirements of transport networks
- Pseudowire modules enable next generation platforms to fully support existing network applications such as ATM, TDM, Frame Relay, and PPP/ML-PPP with flexible Any Service Any Port (ASAP) provisioning
- Fundamental to the InterPort solution is its robust support for native protocols such as OAM, QoS, Structured and Unstructured modes, and network timing and synchronization [...]


Alliance Systems (1)High availability
Features (see all):

Features (see all):- U-3000 3U platform supplies fully redundant power, cooling, and MCHs
- Dual-star topology with a fully passive MTCA.0 R1.0 backplane for 10 Gbps throughput
- Horizontal, flexible design enables installation of double-wide and/or single-wide AdvancedMCs: 4 double-wide and 2 single-wide AdvancedMCs or 10 single-wide AdvancedMCs
- Dual, redundant, tool-less, front-accessible MCHs, power, and cooling
- NEBS Level 3 and ETSI compliant for high availability
- 3U rack-mount MicroTCA system for 2 post 19-24 inch racks
- Dual redundant, hot-swap 400 W AC (600 W AC available in Q3-07) or -48 VDC power supplies with power and cooling for up to 80 W per slot [...]


Ampro ADLINK Technology Inc. (1)Truly rugged by design
Features (see all):
Features (see all):- The Extreme Rugged system features conductive cooling for the Pentium M or Core 2 Duo
- Choice of extreme rugged internal boards -COM 840: Intel Core2 Duo and GME 965 combo -LittleBoard 800: Pentium M or Celeron M CPUs
- Optional -40 °C to +75 °C support (ETT)
- Rugged resistance to shock and vibration
- Wide OS support [...]

AppliedMicro (1)Comprehensive reference design kit for AdvancedTCA and MicroTCA systems, including industry-standard hardware and software solutions
Features (see all):

Features (see all):- Dual 460GT processor based design
- AdvancedMC compliant
- Serial RapidIO (AMC.4)
- GbE (AMC.2)
- PCI Express (AMC.1)
- Single width mid-size form factor
- Includes LINX, an open-source solution for distributed system Inter-Process Communication that is platform/interconnect independent
- Supports RapidFET, a network management and diagnostic tool with a powerful graphical user interface (GUI) for RapidIO-based systems [...]


Armvida, LLC (2)10-slot 4U MicroTCA rack that will mount up to five EDGE2000s
Features (see all):

Features (see all):- Suited for space constrained environments and the enterprise
- MicroTCA compliance
- High Availability design
- Consumes only 4U
- EDGE2000 mounting
- Front to rear airflow
- Optional door [...]


The EDGE2000 is a two slot MicroTCA compliant platform that can support one or two single-width, full size, Advanced Mezzanine Cards (AMCs)
Features (see all):

Features (see all):- High Availability design
- Slot to slot PCI Express connectivity
- GbE internal switching
- Slot to slot SATA/SAS connectivity
- Management bus messaging control (IPMI) [...]


Astek Corporation (3)Enable storage on the MicroTCA backplane
Features (see all):
Features (see all):- The Astek A33603-MCH technology platform provides the basis for building complete storage appliances in a MicroTCA platform
- Integrated 36 port 3 Gbps SAS expander
- Access to internal fabric via front panel IPASS connectors
- Optional 24 port PCI-Express switch
- Supports both SAS and SATA hard disk drives for maximum performance or density
- Pending MicroTCA.2 and MicroTCA.3 versions for outside plant and MIL-COTS installations
- Supports Solid State Disks (SSD) for extreme environments
- One-year limited warranty [...]

MicroTCA Storage Appliance System provides RAID-5/6 storage and iSCSI, NFS, and target mode SAS connectivity to host computers
Features (see all):

Features (see all):- Complete PICMG MicroTCA compliant system in 1U, 3U, or 6U form factors
- With 4-12 disk AdvancedMC sites
- Single or dual-redundant MCH and power modules
- Single or dual-redundant RAID controllers
- Connects to host computers via iSCSI or NFS over 1 GbE or 10 GbE (XAUI) interface
- Can also support SAS bus connectivity from SAS hosts
- Fully managed storage appliance offers RAID volume management, and IPMI based system control compatible with Service Availability Forum specifications
- Can use SAS, SATA, or solid state disk media [...]


Astek Corporation offers a complete line of storage solutions in mezzanine cards, custom PCBs and turn-key storage appliance systems
Features (see all):
Features (see all):- Astek has worked with parallel SCSI, Serial Attached SCSI (SAS), Fibre Channel, Parallel ATA, Serial ATA, solid state (flash). and every major bus interface including PCI, PCI Express, InfiniBand, and HyperTransport
- A3803-PMC - 8 port 3 Gbps PCI-X SAS Host Bus Adapter
- A3803-AMC - 8 port 3 Gbps PCI Express SAS Host Bus Adapter, AMC.0, AMC.3 compliant
- A7404-AMC - 4 port 4 Gbps PCI Express Fibre Channel Host Bus Adapter
- A3XX03-SAS - Complete MicroTCA storage system from 4 to 12 AMC disk modules with up to 2.4 terabytes of storage
- A31203-MCH - SAS enabled MicroTCA Carrier Hub
- A33603-MMC - SAS bus expander on a module, add SAS fabric to any AdvancedTCA card or other form factor of your choice [...]

BittWare, Inc. (1)Building blocks for communications and wireless applications
Features (see all):
Features (see all):- Combining the inherent flexibility of MicroTCA with a reconfigurable AMC and a variety of AMC front panel modules creates a system that can be easily upgraded or modified without initiating frequent redesigns, enabling system designers to extend product lifecycles, enable hardware reuse, and decrease time-to-market [...]

CommAgility (1)An AdvancedMC module that offers a compact, high-performance DSP/FPGA signal processing solution for AdvancedTCA and MicroTCA systems
Features (see all):

Features (see all):- Texas Instruments TMS320C6455 digital signal processor running at 1.2 GHz and a Virtex-4 FX100 FPGA from Xilinx
- Optimized for applications requiring high-end signal I/O bandwidth in a compact mid-height AMC form factor, such as wireless baseband, image processing, defense, and aerospace
- Provides a combination of DSP and FPGA resources, with fast and flexible links to external data and over 256 MB of onboard memory
- The FPGA is directly connected to the DSP via a high bandwidth, low latency 64-bit, 150 MHz local (EMIF) bus to facilitate co-processing
- Processor elements interconnected by a 10 Gbps SRIO infrastructure with external connectivity to an AMC.4 backplane interface and front panel connector
- Supports AMC.2 Gigabit Ethernet interface [...]


Comtel Electronics GmbH (2)MicroTCA development system
Features (see all):

Features (see all):- Allows using AdvancedMC cards directly on a backplane thus reducing the costs for a system
- Single width full height (80%) (full size)
- Single-width, half-height (10%) (compact)
- Double-width, full-height (5%) (double full size)
- Single width 1/3 height (5%) (mid size) Backplane Support:
- 2 x Gigabit Ethernet on Port 0+1 (via MCH)
- 2 x SATA/SAS on Port 2+3 (point to point)
- 4 x PCI Express on Port 4, 5, 6, 7 (via MCH)
- MCH: 12 AdvancedMC’s 6 ports each 72 Ports linked to MCH
- Clock support
- SATA/SAS point to point
- Programmable fan trays [...]


Development system
Features (see all):
Features (see all):- Enables using AdvancedMC cards directly on a backplane thus reducing the costs for a system
- 8U, 8.8" wide, and 10" depth
- Two cubes compoundable to one 19" size
- Backplane: MCH; AMC signals; power; fans and chassis EEPROM
- Power distribution: 60+W per compact AMC slot
- Fan trays: Two independent front access intelligent push-pull or only push cooling
- Air filter and front cable tray
- Dedicated slots for two PM each with 16x 12 V and 16x 3.3 V
- One MCH and a JTAG controller board
- Optional: Telco Alarm Contacts-front LED display
- upper fan tray unit
- Supports AMC.0, AMC.1, AMC.2, AMC.3 & AMC.4 specs [...]

Concurrent Technologies, Inc. (4)MicroTCA development system
Features (see all):

Features (see all):- Supports 4 single-width and 1 double-width AdvancedMC
- Supports PICMG MicroTCA.0 1.0 and PICMG AMC.0
- MicroTCA backplane provides 5 vertically mounted card slots: 1 AdvancedMC double-width full-height slot; 4 AdvancedMC single-width full-height slots; 1 MicroTCA Carrier Hub slot; I MicroTCA Power Input Module Slot [...]


The SY AMC/108 MicroTCA Development System provides the integration engineer with a preconfigured system for development or testing AdvancedMC modules or a target MicroTCA application
Features (see all):
Features (see all):- The system includes a high-performance processor board based on a 2.16 GHz Intel Core 2 Duo processor, graphics and storage as well as MCH, PSU, and cooling system [...]

Double/single width full- or mid-height AdvancedMC
Features (see all):
Features (see all):- Option of one or two 2.5" SATA hard disk or CompactFlash drives fitted
- Suitable for AdvancedTCA, MicroTCA, and proprietary platforms
- Compatible with Raid 0 and Raid 1 systems
- Serial ATA150 (AMC.3 Type S2, ports 2 and 3)
- IPMI 1.5 compliant to AMC.0 [...]

Two choices of low-power Intel Core 2 Duo processors: either 1.86 GHz (SL9400) or 2.26 GHz (SP9300)
Features (see all):
Features (see all):- Suited for: MicroTCA and AdvancedTCA, along with proprietary and Scope Alliance platforms
- Application range: defense, industrial, security, and communications (Voice over IP, wireless base stations, blade servers, and media servers)
- Thermal Design Power (TDP) of a mere 25 W
- Intel ICH 9M-SFF IO Controller Hub
- Intel GS45 Graphics Memory Controller Hub
- Mid- or full-height front-panel versions withstand -25 °C to + 70 °C [...]

Dawn VME Products, Inc. (2)MicroTCA rugged, conduction-cooled platform solution for the most demanding applications
Features (see all):

Features (see all):- Thermal Exchanged FlowTM (TEF) Cooling System allows the use of COTS grade AdvancedMC modules in a 100% sealed electronics compartment
- The ATR-3500 can be configured with a power module, MCH module, and up to four AdvancedMC modules
- MicroTCA Rugged conduction-cooled solution
- 100% Sealed Electronics Compartment
- Six-slot MicroTCA backplane
- Precision-Machined Card Guides result in Maximum Tolerances
- Complete with Dawn's RuSH System Health Monitor
- 6061-T Aluminum Housing
- MIL-STD-901D, MIL-STD-801F, MIL-STD-461E
- CompactPCI and VPX backplane options [...]


Conduction-cooled solution, utilizing standard VPX, CompactPCI, or MicroTCA boards
Features (see all):
Features (see all):- Completely sealed electronics compartment
- Designed and engineered with extremely tight tolerances along with precision machined card guides
- Available in MicroTCA, CompactPCI, or VPX backplanes
- Able to accommodate standard front panels or special rugged panels
- Complete with RuSH system health monitor
- Ensures correct system operation by monitoring temperatures [...]

Dintek Electronic Ltd. (1)Design and manufacturing of AdvancedTCA, MicroTCA, and CompactPCI backplane, chassis, and system platform; standard or customized products
Features (see all):

- 1U, 2U, 4U, 8U, and 10U CompactPCI systems platform with CompactPCI or ATX power supply unit and pluggable fan module
- Systems monitor can be optioned
- Designed and manufacturing 2U, 4U, and 6U AdvancedTCA systems platform
- Designed and manufacturing for MicroTCA systems platform [...]


Dynatem, Inc. (2)Core-Duo based rugged 6U CompactPCI/PICMG 2.16 Single Board Computer
Features (see all):

Features (see all):- Intel Pentium Core 2 Duo Processor at 1.5 GHz or 2.16 GHz
- Available in conduction-cooled versions for rugged applications
- Supports two PMC sites, one of which optionally supports XMC modules
- E7520 chipset for PCIe support, high memory bandwidth and ECC support
- Two Gb LAN front panel ports plus two more routed to the backplane in compliance with PICMG 2.16
- Onboard SVGA Controller [...]


Dynatem introduces a rugged, low-power Pentium M CPU in a single CompactPCI slot
Features (see all):

Features (see all):- Low-power Intel Pentium M processor at 1.4 GHz (-40 °C to +71 °C), extended temperature versions (-40 °C to +85 °C) available at 1.0 GHz
- Ruggedized, VITA 301.1-2002 compliant, conduction-cooled versions with heat sink, stiffener bar, and wedge locks are available
- 855GME and 6300ESB chipset
- 1 GB of DDR-266 SDRAM with ECC, at 2.1 GBps
- One rugged PMC/PMCOne rugged PMC/PMC-X site supports 64-bit PCI up to 66 MHz and a second PMC site with 32-bit @ 33 MHz performance
- DVI-I Video, IDE, FDC, two COM ports, two SATA ports, four USB 2.0 ports, and two GbE ports (PICMG 2.16 compliant) are available through the backplane
- PICMG 2.0 R3.0 compliant with a universal PCI-PCI bridge for operation in system and peripheral slots and hot swap support
- Single-slot CompactPCI operation with up to 8 GB bootable CompactFlash
- Pigeon Point’s IPM [...]


ELMA Electronic (15 of 31)Dual star backplane
Features (see all):
- 2 MicroTCA Carrier Hub (MCH)
- 2 redundant power modules
- 6 AdvancedMCs
- Single width/full height
- Redundant clock architecture
- Integrated in a cube system
- Connections for two cooling units
- According to PICMG MicroTCA.0 Draft 0.86
- Power via M4 bolts [...]

19" rack-mount, compliant to PICMG MicroTCA 1.0 Draft 0.9
Features (see all):
Features (see all):- Dual star backplane
- 2 MicroTCA Carrier Hubs (MCH)
- 2 redundant power modules
- 6 AdvancedMCs, Single width/full height
- Redundant clock architecture
- Integrated in a 7U cube system
- Connections for two cooling units
- Power via M4 bolts
- Front-to-rear cooling configuration [...]

The MicroTCA Pico backplane features slots for 6 AdvancedMC, 1 PM (Power Module), 1 MCH (MicroTCA Carrier Hub), 1 JSM (J-TAG Switch Module) and 2 CUs (Cooling Units)
Features (see all):

Features (see all):- Star Topology (20-layer stripline design)
- Optimized via signal integrity studies [...]


14-slot MicroTCA backplane
Features (see all):

Features (see all):- Complies to MicroTCA.0 Specification Rev 1.0
- High-speed connector up to 6.25 Gbps
- Slot to slot aggregate bandwidth of 5,000 MBps
- 3U height - single star topology
- 14 slots - 12 AdvancedMC, 1 MCH, 1 Power (all single-width/full-size)
- Other versions available in various configurations: Half-height, full-height, single-width, full-width
- Modular and serviceable
- Standard shelf management - MicroTCA Carrier Hub [...]


4U MicroTCA enclosure
Features (see all):

Features (see all):- Front-to-rear cooling
- 14-slot single star backplane
- Chassis compliant to the MicroTCA.0 Rev 1.0 specification
- The unit has slots for 12 AdvancedMC modules, 1 MicroTCA Carrier Hub (MCH), and 1 power module
- Chassis has high EMC shielding and a superior airflow through the card cage due to the implementation of honeycomb filter structures [...]


Modular MicroTCA solution allows a wide range of design options
Features (see all):

Features (see all):- Extrusion-based, with modular card guides allowing various slot counts, card heights, and component configurations
- Compliant to latest MicroTCA.0 specifications
- 4U, 5U, 6U, 7U, and 8U heights
- Accepts various module configurations in one shelf platform
- Various backplane configurations
- Single or dual redundant fan trays in push only or push/pull configurations
- Removable air filter(s)
- Optional locking bars to secure modules in chassis
- Optimized via thermal simulation studies
- Customized versions available [...]


MicroTCA defines a modular backplane architecture designed to support redundant "pods" of AdvancedMC modules
Features (see all):

Features (see all):- Type 39M, 19” rackmount shelf or portable cube
- Sheet metal solution, ideal for high volume applications
- Various backplane configurations
- Single or dual redundant fan trays in push only or push/pull configurations
- Removable air filter(s)
- Optional locking bars to secure modules in chassis
- Optimized via thermal simulation studies [...]


Ruggedized MicroTCA enclosures in a 19-inch rack-mount format
Features (see all):

Features (see all):- As with Elma’s recently released Air Transport Rack (ATR) version of Ruggedized MicroTCA chassis, the 19-inch rack-mount enclosures are designed to meet MIL-STD-810F, 167, 461D, and 901D
- Standard ruggedization techniques can be utilized, including a shock isolated card cage and device mounting
- Rugged chassis shells are incorporated using thick aluminum sheets, extrusions, and die-castings [...]


The Elma Bustronic Star MicroTCA backplane comes with 12 AdvancedMC, 1 power, and 1 MCH slots, all in the full size configuration
Features (see all):

Features (see all):- Utilizes the pressfit style connector
- Complies to MicroTCA.0 Specification Rev 1.0
- Slot to slot aggregate bandwidth of 5,000 MBps
- Approximately 3U height
- 12 AdvancedMC, 1 MCH, 1 Power Module Slot (all full size)
- Modular and serviceable
- Standard shelf management - MicroTCA Carrier Hub (MCH)
- Accepts both single and double modules
- Pressfit connectors standard, compression-mount version optional
- Optimized via signal integrity studies, reports available upon request
- Other versions available in various configurations -- compact and mid size, cube and pico styles [...]


The 5U MicroTCA shelf comes with a 14-slot Dual Star backplane in the single-module, full-size format
Features (see all):
- The backplane offers 10 AdvancedMC, 2-power module, and 2 MicroTCA Carrier Hub (MCH) slots
- Cooling is from three pluggable fan trays with air filtering
- Another feature is locking strips that securely hold the modules in place. Elma has stamped them so they can be cut at any incremental width
- The Elma MicroTCA chassis line employs a modular design approach, allowing various sizes and configurations
- The company offers MicroTCA shelves in 4U, 5U, 6U, 7U, and 8U heights and a portable tower in a 7U height [...]

19" rack-mount, compliant to PICMG MicroTCA.0 Rev. 1.0
Features (see all):
- Single star backplane
- Accepts 12 AdvancedMC modules
- Accepts 1 power module 75 mm high x 6 HP wide
- Accepts 1 MCH module 75 mm high x 6HP wide with four tongue connector
- Redundant clock architecture Integrated in a 7U subrack system
- Front air intake, rear air exhaust, fixed fans below card cage, and cable management tray
- EMC shielding and a superior airflow through the card cage due to the implementation of honeycomb structures [...]

19" rack-mount, compliant to PICMG MicroTCA 1.0
Features (see all):
Features (see all):- Single star backplane
- Accepts 12 AdvancedMC modules
- Accepts 1 power module 75 mm high x 6HP wide
- Accepts 1 MCH module 75 mm high x 6HP wide with four tongue connector
- Redundant clock architecture
- Integrated in a 4U subrack system
- Connections for two cooling units
- Front air intake, rear air exhaust, fixed fans below card cage, and cable management tray
- EMC shielding and a superior air flow through the card cage due to the implementation of honeycomb structures [...]

The unit features 10 AdvancedMC slots, and dual redundant power module and MicroTCA Controller Hub (MCH) slots in a 14-slot backplane
Features (see all):
- The 14-slot Dual Star complies with the latest MicroTCA.0 specifications
- The connectors are compression mount, which can be easily removed from the backplane individually if damaged
- Elma Bustronic is also developing MicroTCA backplane configurations in press fit and SMT styles
- The Elma Bustronic MicroTCA backplane features an 18-layer controlled-impedance stripline design
- There are also eight right angle 10-pin SMD headers for fans
- The company also offers a 6-slot Dual Star for a portable tower chassis and a 14-slot Star design with one power module and MCH slot [...]

14-slot Dual Star MicroTCA backplane. The unit features 10 AMC slots, and dual redundant power module and MicroTCA Controller Hub (MCH) slots in a 14-slot backplane
Features (see all):
Features (see all):- The 14-slot Dual Star complies with the latest MicroTCA.0 specifications
- The connectors are compression mount, which can be easily removed from the backplane individually if damaged
- Elma Bustronic is also developing MicroTCA backplane configurations in press fit and SMT styles
- The Elma Bustronic MicroTCA backplane features an 18-layer controlled-impedance stripline design
- There are also eight right angle 10-pin SMD headers for fans
- The company also offers a 6-slot Dual Star for a portable tower chassis and a 14-slot Star design with one power module and MCH slot [...]

14-slot dual star backplane
Features (see all):
Features (see all):- 10-slot dual star cube backplane
- System platforms: 2.5U open card cage (for cabinet enclosure)
- 4U, 5U subrack: single modules, 14 slots
- 6U subrack: redundant fans, single modules, 14 slots
- 7U subrack: double modules, 14 slots
- 7U cube: single or double modules, 10 slots
- 8U subrack: Redundant fans, double modules, 14 slots
- MicroTCA cabinet: 44U liquid-cooled MicroTCA cabinet enclosure
- MicroTCA components: handles and panels (coming soon) [...]

Embedded Planet (1)Freescale MPC8548 PowerQUICC III processor operating at up to 1.5 GHz in single width, full height AMC form factor
Features (see all):

Features (see all):- AMC.4 compliant with Serial RapidIO for fabric connection
- Configurable x4 and x8 PCI Express signals to AMC connector
- Single Gigabit Ethernet to front and three Gigabit Ethernet to rear AMC connector
- Single SODIMM slot with DDR2 interface for high bandwidth memory performance
- 16 MB of soldered on flash for local boot and persistent data storage
- Can operate in stand alone mode as well as in an AdvancedTCA or MicroTCA system
- 32-bit Freescale Coldfire processor used for Module Management Controller (MMC) and IPMI interface
- Full firmware and Linux support available for rapid deployment and application development [...]


Emerson Network Power Embedded Computing (9)MicroTCA is an open system-level specification targeted for telecom and enterprise applications where smaller system form factor is required
Features (see all):

Features (see all):- Open Frame 19: rack mount chassis with tabletop cabinet
- 12 single-wide content slots with a combination of 6 full height and 6 half-height AdvancedMC modules or 9 full height AdvancedMC modules
- MicroTCA Carrier Hub (MCH) module with dual front panel 10/100/100 Ethernet ports
- Serial RapidIO Fat Pipe Switch with front panel access for intershelf communication
- Support mass storage AdvancedMC modules on pre-designated slots
- IPMI management for power and AdvancedMC modules [...]


The Emerson Network Power MCH-1010/1020 modules, designed to be MicroTCA.0 R1.0 compliant, are high performance and stable solutions for system builders wanting to create a MicroTCA solution using best-in-class components
Features (see all):

Features (see all):- By definition, MicroTCA is a small size and flexible standards-based form factor that is being utilized in many diverse markets – telecom, defense and aerospace, medical and industrial – each with different packaging requirements
- Emerson provides some application-ready MicroTCA system platforms, and some customers will use their in-house expertise to create custom solutions based on commercial off-the-shelf (COTS) building blocks like our MCH
- Full-size module designed to fit into MCH slot of MicroTCA platforms
- Layer 2 unmanaged Gigabit Ethernet switching to each of 12 payload slots with front panel uplinks for external connections
- Optional PCI Express switching with narrow or spread spectr [...]


MicroTCA communications servers provide highly integrated and verified hardware and software components
Features (see all):

Features (see all):- 11-slot MicroTCA shelf provides scalable, embedded communications computing system
- 19" (483 mm) wide, 7" (178 mm) high, 9.3" (237 mm) deep shelf with front-only I/O, and 23" rack-mount option
- 600 W AC or -48 Vdc power entry modules support full complement of AdvancedMCs
- Redundant DC power entry modules, hot-swappable AdvancedMCs, and an easy-to-service design
- MicroTCA Carrier Hub (MCH) combines shelf management, clocking, and fabric switching in a single module, maximizing payload capacity
- GbE backplane fabric with optional PCI Express secondary fabric [...]


Engineered for dependable embedded applications, the Centellis 500 is an innovative MicroTCA solution that is suitable for use in enterprise applications
Features (see all):

Features (see all):- It has been designed from the ground up to be an economically viable solution by utilizing an injection molded plastic enclosure with the smallest number of internal components possible for low-cost high volume manufacture
- The MicroTCA backplane, fans, power module, MicroTCA Carrier Hub (MCH) and a card cage are included and the system is supplied fully tested including SpiderWareM3 Platform Management software and an Emerson designed Intel Core2 Duo based processor Advanced Mezzanine Card (AdvancedMC or AMC) module to speed your time to market
- MicroTCA technology will be used in a wide range of applications
- Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable
- Three (3) availabl [...]


MicroTCA Carrier Hub (MCH) modules
Features (see all):

Features (see all):- Include Layer 2 Gigabit Ethernet, SpiderWareM3 management software and optional PCI Express fabric switch
- Full-size module designed to fit into MCH slot of MicroTCA platforms
- SpiderWareM3 platform management software
- Layer 2 unmanaged (or externally managed) Gigabit Ethernet switching to each of 12 payload slots
- Two Gigabit Ethernet fabric expansion/uplink RJ-45 face plate connections
- Narrowband 100 MHz clock distribution (MCH-1011) for applications that require a PCI Express reference clock
- Optional PCI Express switching (MCH-1021) with narrow and spread spectrum (SSC) 100 MHz clock distribution for applications that require PCI Express fabric capability
- IPMI management functions
- MicroTCA Telecom clock distribution with clock failover
- Three hours of Emerson’s Technical Support [...]


Remote monitoring of multiple IPMI MicroTCA and AdvancedTCA platforms
Features (see all):

Features (see all):- Automated acquisition and update of IPMI information from AMC modules
- Intelligent Alarm monitoring and prioritization
- Sensor Threshold setting
- Monitor CPU and memory usage
- Temperature control and threshold setting
- Fan control
- Field Replaceable Unit information
- SAF HPI and XML over TCP interfaces
- Log of events, incidents and alarms
- Remote software upgrade capability
- Reporting capabilities include filtering, custom report generation, and change history
- Secure login with three levels of administrative access
- M3Graphical User Interface [...]


The MCH-1011/1021 MicroTCA Carrier Hub is a full-size module designed to fit into the MCH slot of MicroTCA platforms
Features (see all):

Features (see all):- SpiderWareM3 platform management software
- Layer 2 unmanaged (or externally managed) Gigabit Ethernet switching to each of 12 payload slots
- Two Gigabit Ethernet fabric expansion/uplink RJ-45 face plate connections
- Narrowband 100 MHz clock distribution (MCH-1011) for applications that require a PCI Express reference clock
- Optional PCI Express switching (MCH-1021) with narrow and spread spectrum (SSC) 100 MHz clock distribution for applications that require PCI Express fabric capability
- IPMI management functions [...]


Designed to the AdvancedMC spec, making it usable in AdvancedTCA and MicroTCA based applications requiring high availability, scalability, and low cost
Features (see all):

Features (see all):- Intel Core 2 Duo processor core with 4 MB L2 cache running at 1.5 GHz
- 667 MHz frontside bus, connecting processor and Intel 3100 chipset
- Up to 4 GB DDR-400 memory with ECC support
- MontaVista CGL or Wind River PNE Linux operating environment combined with Basic Blade Services software compliant to the SA Forum HPI layer
- AdvancedMC front panel support for USB 2.0, Intel 82551 based 10/100 Fast Ethernet and serial console port
- 2 MB of BIOS flash with boot failover support [...]


Series of AdvancedTCA communications servers
Features (see all):

Features (see all):- Integrate 10 Gbps Ethernet switching, a wide range of payload blades and enabling software
- Suitable for applications requiring high bandwidth and high performance
- Portfolio extends from individual blades and modules through fully integrated and validated MicroTCA and AdvancedTCA communications servers [...]


Emerson Network Power Embedded Power (3)Emerson Network Power’s MTC600-AC power module provides a self-contained power solution for MicroTCA systems
Features (see all):
Features (see all):- The module can support shelves, cubes and other system implementations, and is fully compliant with the PICMG MicroTCA.0 Revision 1.0 specification
- TC600-AC power modules implement all of the incoming power conversion, power management and power protection functionality necessary for a complete MicroTCA system comprising up to 12 AdvancedMCs, 2 MicroTCA Carrier Hubs and 2 Cooling Units
- It supports an ac input of 90 to 264 Vac and is suitable for use with single-phase supplies virtually anywhere in the world
- Complete power supply, power management and power protection solution for MicroTCA systems
- Compact, high power-density, single-width module, 12 HP high
- 600 W output power
- 16 output channels, each capable of delivering 12 V at 7.6 A payload power and 3.3 V at 150 mA management power
- Provides [...]

Emerson Network Power’s MTC600-48 power module provides a self-contained power solution for MicroTCA systems
Features (see all):
Features (see all):- The module can support shelves, cubes and other system implementations, and is fully compliant with the PICMG MicroTCA.0 Revision 1.0 specification
- MTC600-48 power modules implement all of the incoming power conversion, power management and power protection functionality necessary for a complete MicroTCA system comprising up to 12 AdvancedMCs, 2 MicroTCA Carrier Hubs and 2 Cooling Units
- It has an input range of -39.5 to -72 Vdc and can accommodate both -48 V and -60 V battery plants.Complete power supply, power management and power protection solution for MicroTCA systems
- Compact, high power-density, single-width module, 9 HP high
- 600 watts output power
- 16 output channels, each capable of delivering 12 V at 7.6 A payload power and 3.3 V at 150 mA management power
- Provides power for up to 12 AMCs, [...]

Complete power supply, power management and power protection solution for MicroTCA systems
Features (see all):

Features (see all):- Compact, high power-density, single-width module: dc-input module is 9 HP high, ac-input module is 12 HP high
- 600 watts output power
- 16 output channels, each capable of delivering 12 V @ 7.6 A payload power & 3.3 V @ 150 mA management power
- Provides sufficient power for 12 AMCs, 2 MCHs & 2 CUs
- Supports 1+1 input redundancy, N+1 output redundancy, and hot-swap operation [...]


EPT, Inc. USA (2)12.5 Gbps signal speeds, with minimal loss of signal integrity
Features (see all):
Features (see all):- Rugged design with ept T-com industry proven press-fit insertion technology
- Easily routed signal paths with off-set pin designs
- High density cost-effective solution when compared directly to compression fit designs
- Highly reliable card edge to PCB connection which eliminated potential pin stubbing
- Available with optional pre-alignment for safe and easy assembly [...]

72 signal contacts (at 2 mm spacing)
Features (see all):

Features (see all):- 24 power contacts
- Contacts stamped with ept Tcom press press-fit technology
- Hot plug contact design [...]


Ericsson (2)Evaluative level MicroTCA power module under part number ROA 117 5078/1
Features (see all):
Features (see all):- High density, high efficiency power module using DC/DC conversion based on synchronous rectification and an FPGA-based Enhanced Module Management Controller (EMMC)
- 355 W output power rated
- -48 VDC input, 16 channels of 12 V payload power and 16 channels of 3.3 V management power in a full-size (6HP) single-width form factor package
- Reduced energy consumption, lower cost of operation, and a lower environmental impact
- High efficiency, typically 95% at half load
- Single-board design offers a cost efficient solution and good thermal performance
- Meets PICMG specification MTCA.0 R1.0, and this version is intended for interoperability testing with other MicroTCA system components
- Suitable for use by system integrators and telecom equipment manufacturers during evaluation and testing of MicroTCA-based systems [...]

Full-size (6HP) single-width, 355 W DC/DC MicroTCA power module
Features (see all):

Features (see all):- Provides power conversion from a -48 VDC input source to 16 independent 12 V channels for payload power and 3.3 V for management power
- Intended for use in applications based on the PICMG Micro Telecommunications Computing Architecture (MicroTCA) specification MTCA R1.0 which defines the requirements for a system that uses PICMG Advanced Mezzanine Cards (AdvancedMCs) connected to a common backplane
- As part of the MicroTCA power subsystem, the power module contains power entry circuitry, such as an EMI filter, transient protection, inrush current limiting, and input line conditioning to provide an interface between the power source and the rest of the power subsystem
- Holdup capacitance is also included for continuous operation during undervoltage transients on the input
- Enhanced Module Management Controller (EMMC) provides an interface to the Car [...]


Extreme Engineering Solutions (4)P.A. Semi Dual-Core PWRficient PA6T-1682 Processor-Based AMC Module (for AdvancedTCA and µTCA)
Features (see all):
- P.A. Semi PWRficient PA6T-1682 processor with dual PA6T Power Architecture cores at up to 2.0 GHz each
- Dual front-panel GbE
- Complies with AMC.0 and MicroTCA.0 (µTCA)
- AMC.1 x8 PCI Express
- AMC.2 10 GbE XAUI
- AMC.2 Gigabit Ethernet
- Up to 4 GB of NAND flash
- Two channels of DDR2 ECC SDRAM, up to 4 GB (2 GB each)
- Up to 3 MB of LPC NOR flash
- Front-panel Micro DB-9 RS-232 serial port
- Linux LSP
- VxWorks BSP
- QNX BSP [...]

Freescale MPC7448 PowerPC Processor AMC module with Gigabit Ethernet, USB, and SATA support for µTCA/AdvancedTCA systems
Features (see all):

Features (see all):- Freescale MPC7448 PowerPC Processor running at up to 1.7 GHz
- Complies to AMC.0 and MicroTCA.0 (µTCA)
- Supports up to 1 GB of 400 MHz DDR SDRAM
- Supports up to 64 MB of Soldered NOR Flash
- Two SFP Ethernet Ports
- Two RS232 Ports
- One USB port
- Optional Ethernet AMC transport
- Optional SATA transport
- Green Hills INTEGRITY BSP, QNX Neutrino BSP, Linux LSP, VxWorks BSP [...]


Intel Core Duo or Intel Core2 Duo Processor-Based AMC Module with GbE, USB, and SATA Support (for AdvancedTCA and MicroTCA systems)
Features (see all):
- Intel 3100 chipset
- Front-panel Gigabit Ethernet
- Front-panel RS-232 serial
- Front-panel USB 2.0
- Complies with AMC.0 and MicroTCA.0 (µTCA)
- AMC.1 x4 PCI Express Fat Pipe interface
- AMC.2 dual GbE 1000BASE-BX interfaces
- AMC.3 Dual SATA interfaces
- Two PC3200 SO-RDIMMs, up to 8 GB
- Up to 4 GB of NAND flash
- Up to 4 MB of Firmware Hub (FWH) storage
- AMI BIOS
- Windows XP / Vista support Linux LSP
- VxWorks BSP
- QNX BSP [...]

Freescale Dual-Core MPC8641D Processor-based AMC module (AdvancedTCA/MicroTCA) with Dual-Bank DDR2 and Quad Gigabit Ethernet
Features (see all):
- Freescale MPC8641D processor with dual e600 cores at 1.0 to 1.5 GHz each
- Dual-bank DDR2-400/533/600 SDRAM, up to 4 GB (2 GB per bank)
- AMC.1 x1/x2/x4/x8 PCI Express at 2.5 GBauds per lane
- Quad Gigabit Ethernet interfaces
- 32-256 MB soldered NOR flash
- 1-4 GB NAND flash
- 1 MB SSRAM
- Dual SATA II over AdvancedMC
- VxWorks BSP
- INTEGRITY BSP
- QNX BSP
- Linux LSP [...]

FCI (2)D-subminiature 7W2 connector options
Features (see all):
Features (see all):- Enable -48 V or -60 VDC input connections to power modules used in MicroTCA shelves
- Each power contact provides 24 A current-carrying capacity
- Shielded connectors are designed to fit the power module faceplate on the front side of a power module made in accordance with the MicroTCA specification
- Board-mount connectors, available as a single port or as a dual-stacked configuration for redundant input feeds, have compact footprint providing more space on the board for routing supplementary traces or additional components
- Board-mount connector offering includes through-mount options suitable for wave soldering or Pin-in-Paste reflow soldering
- Pin-in-Paste processing technology enables through-mount components to be soldered using conventional reflow soldering processes and can eliminate the need for a separate wave soldering operation in the process flow that can resul [...]

Dual-row, 170-position card-edge interface with 0.75 mm contact pitch
Features (see all):

Features (see all):- Surface-mount (SMT)termination optimized for electrical performance, cost and availability
- Very low loss and crosstalk for low-voltage differential signaling at data rates of 12.5 Gbps per lane
- SMT footprint allows for increased flexibility in routing PCB traces
- Metal retention clips at connector ends provide additional mechanical strength after soldering
- Lead-free and RoHS-compatible
- Designed to be compliant with Telecordia Uncontrolled Environment (UE) requirements [...]


GateWare Communications GmbH (1)MicroTCA MCH Base which also can be used as a combined MCH and mid-range CPU board with extension plug-in modules
Features (see all):
- PowerQuicc 8347 CPU 266-667 MHz
- 32-256 MB DDR RAM
- ECC RAM optional
- 8-64 MB flash
- 16-port managed L2-GE Switch
- Up to 12 AMCs, 4 PMs, and 2 CUs
- Stackable switch fabric for PCIe, Serial RapidIO, and XAUI
- Clock generation and distribution
- Management via CLI, WEB, and RMCP
- Linux 2.6x OS [...]

GE Intelligent Platforms, Inc. (3)Pre-validated Modular MicroTCA Platform
Features (see all):
Features (see all):- 2U/13-slot and chassis
- Preconfigured with processor, networking, storage and graphics AdvancedMCs
- Pre-validation guarantees interoperability, minimizes integration time
- Fully compliant with PICMG standards
- Pre-configured with a Power Module, dual Cooling Units, and MicroTCA Carrier Hub (MCH) with PCI Express fabric module
- Telum Intel-based processor
- Dual SATA storage modules
- Multi-port Gigabit Ethernet I/O interface and VGA graphics AdvancedMCs
- A Carrier Grade Linux (CGL) operating system and Linux Support Package (LSP) with CGL drivers are pre-installed on the platforms
- Four single full-size payload slots
- Each slot supports full-size or compact AdvancedMCs
- A MicroTCA Carrier Management Controller (MCMC), using an IPMI (Intelligent Platform Management Interface) provides the low-level hardware management interface that controls the AdvancedMCs, PM, and CU [...]

Pre-validated modular MicroTCA platform
Features (see all):
Features (see all):- 8U/15-slot chassis
- Preconfigured with processor, networking, storage and graphics AdvancedMCs
- Pre-validation guarantees interoperability, minimizes integration time
- Fully compliant with PICMG standards
- Pre-configured with a Power Module, dual Cooling Units, and MicroTCA Carrier Hub (MCH) with PCI Express fabric module
- Telum Intel-based processor
- Dual SATA storage modules
- Multi-port Gigabit Ethernet I/O interface and VGA graphics AdvancedMCs
- A Carrier Grade Linux (CGL) operating system and Linux Support Package (LSP) with CGL drivers are pre-installed on the platforms
- Seven single full-size payload slots
- Each slot supports full-size or compact AdvancedMCs
- A MicroTCA Carrier Management Controller (MCMC), using an IPMI (Intelligent Platform Management Interface) provides the low-level hardware management interface that controls the AdvancedMCs, PM, and CUs
- [...]

AdvancedTCA single board computer with two dual-core Intel Xeon LV 2.0 GHz processors and flexible memory options
Features (see all):

Features (see all):- Utilizes two dual core Intel Xeon LV 2.0 GHz processors which provide four high-performance processor cores per platform
- Provided with 2 MB of L2 cache, Up to 8 GB DDR-2 400 SDRAM with ECC
- Support for a Serial ATA connection using the AdvancedMC site
- PICMG 3.1 compliant
- AMC.1 compliant site (single-width, full-height, 60 W max.) PCI Express x 8 (local resource only)
- Mouse/keyboard support, Dual TTL level serial connections, USB 2.0 connections, and 32-bit/33 MHz PCI bus connection out the “User” zone [...]


General Micro Systems, Inc. (1)Rugged, Expandable, CompactPCI storage module with real-time encryption
Features (see all):
- Up to 750 GB of Hard Disk Drive (HDD) or up to 384 GB of Solid State Disk (SSD) or up to 240 GB of Rugged Hard Disk Drive (RHDD)
- Over 100 MBps transfer rates using SSD/HDD in Stripe mode
- Over Current Protection (OCP) for each drive
- Optional Real-Time Encryption device for each drive at full SATA-2 speeds
- Fully compliant to NIST (National Institute of Standards and Technology) and CSE (Communication Security Establishment) certified hardware AES (Advanced Encryption Standards) algorithm
- Ultra fast Non Destructive data zeroing
- 256 bit AES encryption key
- Key may be stored onboard, offboard, or removable
- Built-In Power-On-Self-Test (POST) to ensure product reliability
- Onboard PIC micro controller to perform power diagnostics and system tests
- Onboard heaters and control circuit to assure operations well below -40 °C
- Pass/Fail a [...]

Global Velocity (1)Enables next gen network services via a 3U MicroTCA network appliance with an FPGA-based packet processing AMC, patented IP Cores and reusable network services
Features (see all):

- Wire speed Deep Packet Inspection (DPI) via programmable hardware (FPGA)
- Wire speed flow reconstruction via programmable hardware
- Wire speed pattern recognition and policy enforcement of traffic via programmable hardware
- Service-oriented architecture allows rapid deployment of next generation network services
- Scalable network interface modules up to 10 Gbps
- Standard Linux development environment
- Redundant power supplies
- Hot swap, SATA storage technology
- RAID on board storage capability for relational database support
- 3U MicroTCA platform built for next generation networking
- Highly configurable statistics engine [...]


HARTING (7)The HARTING AdvancedMC backplane connector for MicroTCA systems is designed to support data transmission speeds of up to 12.5 Gbps
Features (see all):
Features (see all):- The connector is terminated with rugged press-fit technology and meets MicroTCA.0 shock and vibration requirements
- HARTING AdvancedMC connectors feature con:card+ technology
- con:card+ is the new quality seal that identifies connectors providing the highest level of mating reliability for AdvancedMC modules. con:card+ connectors feature unique GuideSpring technology that pushes and holds the AdvancedMC module against the connector housing
- By preventing module float in the connector, con:card+ connectors enhance the reliability of AdvancedMC systems under shock and vibration [...]

HARTING’s comprehensive offering of AdvancedTCA and MicroTCA power connectors are designed to meet PICMG standards and performance requirements
Features (see all):
Features (see all):- Designed in accordance with the PICMG 3.0 specification, HARTING’s AdvancedTCA hybrid power connector have 8 power contacts (AWG size 16), rated to 16 A with 22 signal contacts (AWG size 22) for critical management functions
- HARTING’s 96-position MicroTCA hybrid power connector is suitable for use in MicroTCA Power Supply Units (PSUs)
- The 24 power contacts are rated to 9.3 A @ 80% derating (IEC 60 512 method), and the 72 signal contacts supply crucial management and power functions to the system
- The connectors are designed in accordance with the PICMG MTCA.0 R1.0 symmetric footprint [...]

The HARTING AdvancedMC connector (B+ style) is fully compliant with the PICMG AMC.0 specification for use with AdvancedTCA carrier boards or related applications
Features (see all):
Features (see all):- The HARTING MicroTCA connector is fully compliant with the PICMG MicroTCA specification for use with MicroTCA backplanes
- Both connectors are designed to support the full range of AdvancedMC data transmission speeds up to 12.5 Gbps while sharing a precision press-fit compliant pin designed for 0.55 mm plated PCB holes
- This provides significant reliability advantages over other termination technologies
- The footprints minimize PCB layer count, leading to PCB mfg cost reductions
- HARTING AdvancedMC connectors feature con:card+ technology for enhanced mating reliability*(www.concardplus.com) [...]

Four-stage sequential contact engagement for hot swap capability
Features (see all):
Features (see all):- Proven reliability with HARTING press-in technology
- Robust design of AdvancedTCA power connector has a female guide receptacle and male peg for reliable blind mating
- MicroTCA power connectors have integrated coding and guiding features for accurate placement - blind mating
- Durability - Selectivity gold plated, AdvancedTCA power connectors guarantee a minimum of 250 mating cycles
- Durability – Via gold and palladium nickel plated, MicroTCA power connectors guarantee 250 mating cycles [...]

AdvancedTCA and MicroTCA connectors: Press-fit termination technology for a most reliable connection; Assembly with standard flat rock
Features (see all):
Features (see all):- High availability – MicroTCA and AMC B+ connectors are in serial production; High speed differential applications up to 12.5 Gbps
- Optimized footprint enables routing on low count
- Fully compliant with PICMG AMC.0 and MicroTCA specifications
- Excellent routing capabilities with wide-routing channels and low cross talk
- HARTING also offers the full range of power connectors specified for use within AdvancedTCA or MicroTCA systems
- con:card+ features: GuideSpring offsets PCB finger tolerance deviations by constantly pressing the module against the opposite wall
- GuideSpring slot is designed for the AdvancedMC module, and increases mating reliability
- GuideSpring secures the module position in the case of shocks and vibrations
- This prevents loss of contact and surface wear
- Me [...]

AdvancedTCA - MicroTCA Connectors
Features (see all):
Features (see all):- Press-fit termination technology for connection reliability and assembly
- Optimized footprint enables routing on low layer count; Fully compliant with PICMG AMC.0 and MicroTCA specs
- Excellent routing capabilities with wide-routing channels and low cross talk
- *con:card+ Design Enhancements
- GuideSpring offsets PCB finger tolerance deviations by constantly pressing module against the opposite wall
- GuideSpring secures module position against shocks and vibrations preventing loss of contact and surface water
- Wear resistant via corrosion-resistant contact plating, surface & relaxation-material; ruggedized connection [...]

The HARTING Plug Connector for AdvancedMC modules replaces the PCB gold pads, increasing the contact reliability
Features (see all):
Features (see all):- It is fully compatible with AdvancedMC card edge connectors and can be used in both MicroTCA and AdvancedTCA environments
- The new version of the HARTING connector provides the required data transmission speed of 12.5 Gbps
- The assembly is streamlined as the connector can now be mounted on the main component side using an automatic pick and place machine and the standard reflow soldering process
- For MicroTCA MCH modules with switched fabric functionality, HARTING offers the new Piggyback Plug connector for a connection from PCB #3 to the mating tongue #3 and #4
- Replaces the PCB card edge gold pads
- Ensures controlled quality of both backplane and module side
- Accommodates small dimensional tolerances compared to PCB card edge
- Guarantees a consistent, defined hard gold surface of the contacts
- [...]

Hybricon Corp. (4)A rugged MicroTCA full ATR tall long chassis 10.5" (W) x 10.625" (H) x 19.62" (D) with front to rear air flow
Features (see all):
Features (see all):- The chassis features a shock-mounted MicroTCA card cage for rugged environments with MIL-STD-461 EMI containment; fully EMI gasketed
- The top load MicroTCA/AdvancedMC cards MicroTCA card cage supports a front 150 mm section and rear 75 mm section, with air flowing through the two series front to back [...]

Liquid-Cooled Rugged MicroTCA
Features (see all):
Features (see all):- 3/4-ATR tall long liquid-cooled chassis
- Compatible with water and water-glycol fluids up to 150 PSI (Contact Factory for Different Fluid Types)
- Rugged environments for applications such as airborne and ground mobile
- Shock & vibration per ANSI/VITA 47 class OS1 and V2
- Compatible with the latest PICMG Rugged MicroTCA draft specifications including optional faceplate fasteners
- Payload Forced Air Cooled per PICMG Air Cooled MicroTCA.1 Draft
- Allows deployment of 0 °C to +55 °C temperature range payload cards at 10,000 ft. with liquid temperature of 0 °C to +45 °C @ 2 GPM
- Internal MIL grade fan – re-circulating air is cooled by passing through Liquid-to-Air Heat Exchanger
- Supports 11 slot MircoTCA Backplane
- 300 Watt 28VDC Power Supply compliant to MIL-STD-704F and MIL-STD-1275
- EMC Designed to meet MIL-STD-461E
- Operating Temp: Ambient: -40 °C to +71 °C
- Liquid Temp: 0 [...]

Full ATR tall long chassis 10.5" (W) x 10.625" (H) x 19.62" (D) with front to rear airflow
Features (see all):

Features (see all):- Shock Mounted MicroTCA card cage for rugged environments
- MIL-STD-461 EMI containment
- Fully EMI gasketed
- Top load MicroTCA/AdvancedMC cards
- MicroTCA card cage supports a front 150 mm section and rear 75 mm section, with air flowing through the two series front to back
- AC/DC front end power supply supporting 110/220 VAC operation with 48 Vdc output to DC MicroTCA power module
- Shock mount MicroTCA card cage inside the outer enclosure
- 150 mm front row
- 3 full-size double-width (150 mm) slots for 150 mm AdvancedMC modules
- 2 full size double width slots with conversion module to convert to (2) single width slots
- 75 mm rear row 2 full size single width (75 mm) slots for 1 DC or AC MicroTCA power module
- (1) Compact single width (75 mm) AdvancedMC slot (accessible only with DC power supply)
- 1 full size single w [...]


Full ATR long chassis with a shock-mounted MicroTCA card cage for all rugged environments
Features (see all):

Features (see all):- 10.5” W x 10.625” H x 19.62” D with front to rear airflow
- MIL-STD-461 EMI containment; fully EMI gasketed
- Top load MicroTCA/AMC cards
- MicroTCA Card Cage supports a front 150 mm section and rear 75 mm section, with air flowing through the two series front to back
- AC/DC front end power supply supporting 110/220 VAC operation with 48 VDC output to DC MicroTCA Power Module
- Shock-mount MicroTCA card cage inside the outer enclosure
- 150 mm Front Row, 3 full-size double-width (150 mm) slots for 150 mm AdvancedMC modules, 2 Full-Size Double-Width slots with conversion module to convert to (2) single-width slots
- 75 mm rear row 2 full-size single width (75 mm) slots for 1 DC or AC MicroTCA Power Module, (1) Compact Single-width (75 mm) AdvancedMC slot (accessible only with DC power supply)
- 1 full-size single width (75 mm) [...]


In2Connect (1)Leading edge range of Advanced and MicroTCA connectors
Features (see all):

Features (see all):- Con:card+ qualty seal
- GuideSpring to ensure optimum alignment of AdvancedMC card to connector contact axis
- Super smooth contact surface
- Wear resistant contact plating
- Relax resistant contact material
- Rugged press-fit PCB board connection [...]


Interphase Corporation (3)Breakthrough features and channel density for next-generation media gateways, basestation controllers, and radio network controllers
Features (see all):

Features (see all):- Quad-Port channelized single-width, single-height module OC-3/STM-1 interface processor used to support integration with TDM telecom interfaces in the network
- Support for DSO channels and subrate processing
- Support for subrate flows at 8, 16, and 32 KBps
- I-TDM/SFP processing for up to 8,064 DSO channels: Up to 100 I-TDM/SFP flows
- Up to 512 DSO channels per flow
- Gigabit Ethernet interface to carrier
- Designed for RoHS
- MicroTCA ready [...]


High-density SS7 communications controller designed to connect applications to TDM/ATM networks, ideal for a broad spectrum of signaling applications such as signaling gateways, wireless network control elements, media server/gateways, and monitoring services
Features (see all):
Features (see all):- Eight interfaces, individually software configurable as T1, E1 or J1
- Optimized for SS7 and Media applications
- Supports up to 248 LSL, 8 HSL, or 248 media channels to dramatically optimize slot usage
- For ATCA and µTCA platforms
- On-board support for multiple network protocols: SS7 (MTP1 & MTP2) LSL/HSL, SAAL/GR-2878, AAL5/ATM, Monitoring, and TDM-to-IP Media Gateway
- Reliable and field-proven Software Development Suite (iWARE SDS)
- Single-width, mid- or full-size AMC.0 R2.0 compliant
- Front or rear access
- High-impedance mode interfaces for monitoring applications
- Customization available [...]

For use as a high-performance bridge for cell-based and circuit-based networks or as a cost-effective Gateway on a Card when using optional Interworking Application software. Ideal for wireless network elements that connect to the 3GPP lu interface
Features (see all):
Features (see all):- 64,000 ATM Permanent Virtual Circuits (PVCs)
- 1M/sec AAL2 CPS packets
- 50,000 Active CIDs for AAL2 PVCs
- Designed to support OC-3c/STM-1 interfaces in ATCA and µTCA-based systems
- Four OC-3c/STM-1 or one OC-12c/STM-4 SFP interfaces
- 3GPP GTP-U encapsulation over IP and UDP/IP stacks available
- Multiprotocol: AAL1, AAL2, and AAL5, ATM and PPP over Sonet/SDH
- Carrier grade availability with APS support terminated on physically separate 3650 cards
- Embedded MIPS 24K 450 MHz Wintegra™ WinPath2™network processor
- Telecom clocks can be input and output on AdvancedMC CLK1 and CLK2
- Customization available [...]

JumpGen Systems (3)XAUI MicroTCA Development Platform (CAM-600) to enable customers to begin development quickly with JumpGen’s PRM-100, T6M-100, and TPM-100 AdvancedMC(PrAMC) product line supporting 10 Gbps Ethernet fabric (fat pipes) connections
Features (see all):

Features (see all):- Supports all AMC Connector I/O with a single MCH
- 1U MicroTCA chassis with six mid-size AMC sites, one Power Module and one MCH
- Backplane routing to MCH bay switches supports Dual 10 GbE interfaces AMC.2 Type 6 and Dual GigE interfaces (AMC.2 Type E2) on each AMC bay and AMC.3 Point to Point routing between AMC sites
- MicroBlade, LLC Panther 380 W Power Module with -48 VDC input power is based on state of the art FPGA and advanced technologies for energy management and remote monitoring, diagnostics, software updating and reconfiguration
- NAT-MCH-Base12-XAUIx48 providing Shelf Management and backplane switching for 12 GbE control plane and 12 (x4) 10 GbE (XAUI) ports, 2 each per AMC si [...]


64-core processor card is a high-performance Processor AdvancedMC (PrAMC) card designed for use in AdvancedTCA or MicroTCA systems
Features (see all):

Features (see all):- TILE64 processor with 64 cores running at 700 MHz
- 2 GB of ECC DDR2 memory running at 800 MHz
- Up to 8 GB of persistent memory
- Dual 10 GbE interfaces (AMC.2 Type 6 or AMC.2 Type 5 with 10 Gbps SFP+ on front panel)
- Dual GbE interfaces (AMC.2 Type E2)
- Front panel I/O includes an RS-232 serial and an optional SFP+ for 10 Gbps fiber connection
- Available in PICMG AMC.0 Revision 2.0 mid-size or full-size [...]


AdvancedMC (PrAMC) platform
Features (see all):
Features (see all):- TILE64 processor with 64 cores running at 700 MHz
- 2 GB of ECC DDR2 memory running at 800 MHz
- Up to 8 GB of persistent memory
- Dual 10 GbE interfaces (AMC.2 Type 6 or AMC.2 Type 5 with 10 Gbps SFP+ on front panel)
- Dual GbE interfaces (AMC.2 Type E2)
- Front Panel I/O includes an RS-232 Serial and an optional SFP+ for 10Gbps fiber connection
- Available in both full and mid-size AMC configurations for AdvancedTCA, MicroTCA, and proprietary architecture systems
- RoHS-compliant
- Complete set of tools and runtime software stack provided by the Tilera multicore development environment [...]

Kaparel Corporation (9)2U rack-mounted MicroTCA chassis with 14-slot backplane
Features (see all):
- Complies with PICMG MicroTCA 0.R1.10 and AMC 0.R1.0
- System availability of at least 99.999%
- Hot swap compatible
- Heat dissipation of 20-80 watts per module
- MCH and AdvancedMC modules plugged directly into the backplanes
- RoHS compliant [...]

Rittal incorporates innovative components to produce reliably available systems up to level 5 for AdvancedTCA and MicroTCA
Features (see all):
Features (see all):- Everything is fully assembled, ready to run and individually configured
- And the same naturally applies equally for CompactPCI, VME, and VME64x
- Case solutions in 5U, 12U, 13U, or cube design
- Climate control concepts up to 200 W/board and more
- High-speed backplanes up to 10 Gbps
- High-speed backplanes up to 10 Gbps variable
- Shelf Management Concepts - Rittal incorporates innovative components to produce reliably available systems up to level 5 for AdvancedTCA and MicroTCA [...]

Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0
Features (see all):
Features (see all):- System availability of at least 99.999
- Hot swap compatible
- 19" rack-mount, 482.6 mm, 5U, 200 mm deep
- Fan and filter unit (for development systems)
- Stainless steel construction provides excellent corrosion resistance
- Available with 14 slots
- MCH and AdvancedMC and power modules plugged directly into the backplane
- Compact design for variable installation
- RoHS compliant
- Slot cooling 20 W to 80 W per module
- Full range of faceplates and filler panels
- Air management panels and handles available [...]

Case solutions in 5U, 12U, 13U, or custom
Features (see all):
Features (see all):- Climate control concepts up to 200 W/board
- High speed backplanes up to 10 Gbps
- Systems available up to Level 5 for AdvancedTCA and MicroTCA
- Fully assembled, ready to run, and individually configured for AdvancedTCA, MicroTCA, and PicoTCA [...]

Modular 19-inch chassis in 2U design supporting up to 12 AMC and an MCH in full–size and compact form factors, and as an option also in “double full-size”
Features (see all):
- Integrated 90-264 VAC power pack supplies the necessary voltages of 3.3 V for the IPMI and 12 V for the AMCs
- PicoTCA was developed for laboratory and field environments and reflects essentially the specifications of PICMG MicroTCA 0.R1.0
- Existing and new applications can be migrated to this MicroTCA platform both quickly and cost effectively
- This represents a decisive benefit for developers of industrial and telecommunications applications
- Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0
- NEBS-compliant
- Hot Swap compatible
- 19" rack-mount, 482.6 mm, 2U, 254-mm deep
- Includes 2 hot swappable fan trays (push-pull) and exchangeable air filter
- Stainless steel construction provides excellent corrosion resistance
- RoHS compliant
- Accommodates up to 1 [...]

[...]
AdvancedMC modules are plugged directly into a backplane without a carrier card
Features (see all):
Features (see all):- MicroTCA stands out due to its very small design and its high scalability and reduced system costs
- Compact design allows a variable installation in 300 mm deep, 482.6 mm (19" ) enclosures or instrument cases and wall-mounted enclosures
- Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0
- System availability of at least 99.999%
- Hot-swap compatible
- 19" rack-mount, 482.6 mm, 3U, 200 mm deep
- Stainless steel construction provides excellent corrosion resistance
- Available with 14 slots
- MCH and AdvancedMC and power modules plugged directly into the backplane
- Compact design for variable installation
- RoHS compliant
- Slot cooling 20 to 80 W per module
- Full range of faceplates and filler panels
- Air management panels and handles available [...]

Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0
Features (see all):
Features (see all):- NEBS- and RoHS Compliant
- Hot Swap Compatible
- 19" Rack-mount, 482.6mm, 2U, 254-mm deep
- Includes 2 hot swappable fan trays and exchangeable air filter
- Stainless steel construction provides excellent corrosion resistance
- Accommodates up to 12 AMCs and 1 MCH
- AC/DC power supply, max. 450 watts
- Input voltage 90 VAC max 264 VAC with PFC
- Support for up to 12.5 Bb/s
- Full range of faceplates and filler panels [...]

Modular 19-inch chassis in 2U design supporting up to 12 AdvancedMCs and an MCH in full–size and compact form factors, and as an option also in “double full-size”
Features (see all):
Features (see all):- Complies with PICMG MicroTCA 0.R1.0 and AMC 0.R1.0
- NEBS-compliant
- Hot swap compatible
- 19" rack-mount, 482.6 mm, 2U, 254 mm deep
- Includes 2 hot swappable fan trays (push-pull) and exchangeable air filter
- Stainless steel construction provides excellent corrosion resistance
- RoHS compliant
- AC/DC power supply, maximum 450 watts
- Input voltage 90 VAC max 264 VAC with PFC
- Backplane with integrated JTAG connectors for debugging and testing
- Support for up to 12.5 Gbps
- Full range of faceplates and filler panels [...]

Kontron (10)MicroTCA is a new PICMG standard for open modular systems designed to address cost sensitive and physically small applications
Features (see all):
Features (see all):- In addition to the wide variety of form-factors offered by Kontron, MicroTCA offers extremely high communication bandwidth, high processing capacity, and high availability
- Deployed into a wide range of application spaces, including defense, government, aerospace, industrial automation, and medical, MicroTCA proves itself as a versatile and affordable form-factor
- Applications in these spaces present some similar requirements, including very high communication bandwidth and/or very high availability in a small form factor
- All of these factors combine to help make MicroTCA a leading choice for demanding applications [...]

Extensive range of platforms available
Features (see all):
Features (see all):- Favorable cost, size, and modularity
- High network capacity
- Modular and serviceable
- Full conformance with the AMC.0 definition
- Supports any/all AMC-defined form factors
- Hot swap/plug-and-play support in conformance with AMC.0 and consistent with AdvancedTCA [...]

5-slot MicroTCA system is well suited for compact size Industrial PC applications
Features (see all):

Features (see all):- This system is preconfigured and tested to speed up MicroTCA developments
- Integrated 150 W AC power supply
- Dual-Core Processor AMC module
- 1x MCH with PCIe switch (3rd party product from NAT) - 1x AM4010 PrAMC 2GB ,1.5 GHz - 1x AM4500 SATA HDD AMC 60 GB
- Bottom-to-top integrated fans
- Pre-installed WindRiver Linux
- Extremely well suited for compact size Industrial PC applications [...]


Management Controller Hub
Features (see all):
Features (see all):- System management and Ethernet switching for up to 12 AdvancedMC modules
- Unlike the telecommunication segment, where advanced feature sets require managed switches with complex control software, such features are not required in most industrial applications
- Unmanaged BCM5396 Ethernet switch, which simplifies designs and improves costs (lower cost components, no switch controller, no software for switch controller)
- Among the typical applications are image processing in the industrial and medical sectors, industrial control systems, information systems for trains, and simple communication systems without need for managed switches
- Supplements the current activities in the PICMG concerning MicroTCA.1, which target MicroTCA in a rougher industrial environment outside the central office as well as in vehicles
- Single PCB solution with only one MCH tongue
- Provides one GbE uplink on the [...]

AdvancedMC processor module
Features (see all):
Features (see all):- Single-width, full-height
- Intel Pentium M, scalable up to 2.0 GHz
- Max. 4 GB DDR2 400 MHz memory
- Max. 4 GB soldered flash for embedded application code
- Flexible Gigabit and PCI Express fabric interface
- Superb monitoring features
- PICMG AMC.0/.1/.2/.3 compliance
- IPMI v1.5 support [...]

Compact and modular MicroTCA platform
Features (see all):
Features (see all):- Configured for the design of small, compact and highly integrated multiprocessor systems based on either PCIe and GbE packet switching backplane technologies
- Pre-validated solution equipped with either the Kontron AM4010 AdvancedMC processor module or with the optional Kontron AM4100
- The Kontron AM4010 AdvancedMC processor module is available in an array of LV and ULV Intel Core Duo and Intel Core2 Duo processor options that represent substantial processing power and maximum MIPS per W for both AdvancedTCA and MicroTCA redundant system designs
- Based on the 1.5 GHz Dual Core Freescale PowerPC MPC8641D, the optional Kontron AM4100 delivers up to 2.3 MIPS/MHz computing performance and maximum Ethernet bandwidth
- AM4100 version also supports Serial RapidIO as option to PCI Express
- Chassis: 3U high, 250 mm deep, and 156 mm wide
- AC power supply and fans with airflow from b [...]

Single-width AdvancedMC processor module
Features (see all):

Features (see all):- Designed with the new Intel Mobile Core i7 processor
- Single-width Kontron AM4020 AdvancedMC processor board integrates for the first time the memory controller, PCI Express, and the graphics processor within the multicore processor
- Intel QM 57 Platform Controller Hub
- Ideal for MicroTCA and AdvancedTCA telecommunications applications such as IPTV, media servers and media gateways, conference systems, and in test systems for wireline networks, and medical, automation, aerospace, military, and security markets
- MicroTCA.1 support for a robust system design
- Optional temperature range of -25 °C to +70 °C
- AM4020 CPU board offers eight PCI Express lanes to the backplane, configurable as 2 x PCIe x 4 or 8 x PCIe x 1, four GbE ports; two on the front and two on the backplane (AMC.2), 4 x SATA
- Up to 32 GB of flash memory can be implemented via a SATA Flash module, which [...]


MicroTCA platform
Features (see all):

- Compact system for up to 12 mid-size AMCs (single-width and double-width)
- Dual Pluggable Power Supplies AC & DC
- Dual-Star backplane incl. GbE, 10 GbE, PCIe, and Serial RapidIO according to SCOPE mapping
- Management Options: From basic MCH to fully featured MCH; one or two MCHs
- 5U system, one-half of 19-inch wide, 215 mm deep (chassis only)
- Options: 2x OM6120 units mountable in one 19-inch rack; 2nd fan unit mountable on top
- Ready to use: system configured and operating system installed
- Customizable design [...]


Multicore processor AdvancedMCs for use in both AdvancedTCA and MicroTCA applications
Features (see all):

Features (see all):- 4010: Intel Core Duo or Intel Core 2 Duo, scalable up to 1.66 GHz
- 4010: Up to 2 GB SDRAM memory (soldered) with ECC running at 400 MHz
- 4010: Single width, full-size, or mid-size
- 4100: Freescale dual-core MPC8641D PowerPC, 1.0/1.33/1.5 GHz
- 4100: 0.5/1/2 GB soldered SDRAM memory
- 4100: Single-width, full-size, or mid-size [...]


AdvancedMC IPSec module
Features (see all):
Features (see all):- Mid-size form factor
- IPsec encryption performance: IPV4/IPV6 ESP, (3DES/SHA1) 1.5 Gbps (1500-byte packet); IPV4/IPV6 ESP (AES128/SHA1) 2.6 Gbps (1500- byte packet)
- Public key performance; 1K IKE handshakes/sec (quickmode w/2DH); 1K SSL/TLS handshakes/sec
- Compression engines: LZS and MPPC engines run at up to 3.5 Gbps and increase the effective data rate throughput of the 8155 when enabled
- Support for up to 3,072-bit public keys
- IPMI 1.5 support plus remote upgrade capability from all IPMI interfaces (via IPMB) [...]

LCR Electronics (3)Rugged enclosures configured to ARINC 404A
ATR chassis ideal for rugged embedded computing applications with increased flexibility in commercial, industrial, military environments
Features (see all):

Features (see all):- Chassis conforms to MIL-STD standards
- Conforms to rigorous, industry-leading MIL-STD specifications including 810F Methods 514.5, 513.5, 516.5, 507.4, and 509.4 for vibration, acceleration, shock, humidity, and salt fog, respectively
- Meets MIL-STD specifications 167 Type 1, Para. 5.1 for vibration, 901D lightweight hammer for shock and 461D for EMI
- Up to a 10-slot backplane with machined back construction
- Configured to ARINC 404A
- Chassis are air-cooled or conduction-cooled in a variety of standard and custom sizes
- Operating temperature is -40 °C to +85 °C and storage temperature is -55 °C to +95 °C [...]


Available in 3-slot, 5-slot, and 14-slot (PICMG 3.0 REV 2)
Features (see all):
Features (see all):- Available in 14-slot (PICMG 3.0 REV 3)
- Dual 6-slot enclosure to allow for two fully independent, EMI isolated,AdvancedTCA systems to function in a single 12U x 19-inch rack-mountable chassis that meets PICMG 3.0 REV 3 [...]

Lineage Power (1)The MPS Series is designed to provide 400 W/600 W of power and power management functionalities supporting the MicroTCA shelf per the PICMG MicroTCA Base Specification
Features (see all):
Features (see all):- 400 W/600 W MicroTCA DC/DC Power Module supporting 12 AdvancedMCs, 2 Cooling Units and 2 MCHs
- Compliant to PICMG MicroTCA.0 (Rev 1.0) and PICMG HPM.1 Firmware Upgrade (Rev 1.0)
- Wide Input voltage range: -36 Vdc to -75 Vdc
- Typical efficiency: 90%
- 7.6 A of 12 Vdc payload current per channel
- 150mA of 3.3 Vdc Management current per channel
- 750 mA of 5Vdc Shared Management Power (SMP) [...]

Linear Technology Corporation (3)MicroTCA MOSFET diode OR controller
Features (see all):
- Low-cost replacement for ORing diode in multiple power supply applications
- External N-channel MOSFETs for high-current capability
- Internal boost regulator supply for high-current capability
- Internal boost regulator supply for MOSFET gate drive
- 1.2V to 18V input range
- Fast switching MOSFET gate control
- Input under and overvoltage protection
- STATUS and FAULT# outputs for monitoring
- Internal MOSFET gate clamp
- Available in 10-pin MSOP [...]

A MicroTCA dual hot-swap controller with a dual-level circuit breaker
Features (see all):
- Allows safe board insertion and removal from a live backplane
- Configurable power supply sequencing
- Soft start with current foldback limits inrush current
- No external gate capacitor required
- Adjustable dual-level circuit breaker protection
- Controls supply voltages from 1 V to 13.5 V
- Independent N-channel FET high-side drivers
- FB pins monitor Vout for overvoltage protection
- Latch off or automatic retry on current fault
- FAULT and PWRGD outputs
- Narrow 16-pin SSOP package [...]

Dual supply (12 V and 3.3 V) hot swap controller for Advanced Mezzanine Card
Features (see all):

Features (see all):- Allows safe insertion into live AdvancedMC or MicroTCA backplane
- Controls 12 V Main and 3.3 V auxiliary supplies
- Limits peak fault current in ≤1µs
- High side current sense, adjustable current limit with circuit breaker
- Integrated 0.3Ω AUX switch
- LTC4223-1: Latch Off After Fault LTC4223-2: Automatic retry after fault
- Thermal shutdown protection
- 16-lead SSOP and 5 mm x 4 mm DFN packages [...]


LynuxWorks, Inc. (1)A powerful set of graphical tools for improving software quality for real-time C and C++ LynxOS applications
Features (see all):
- Available on native x86 and PowerPC LynxOS platforms
- Improves sofware reliability by verifying memory references and program implementation
- Find application bugs during the development and integration phase rather than in the fielded product
- Finds all memory reference efforts - does not use a statistical approach to trap memory errors but instead checks each memory reference for validity when that reference is executed
- Finds library interface errors
- Inuse, part of LynxInsure, allows users to watch a program allocate and free dynamic memory blocks
- The TCA (Test Coverage Analysis) tool displays code coverage data collected by LynxInsure++ at run time and groups code into logical blocks
- Installation requirements include 16 Mbytes main memory, 30 Mbytes hard disk, and a CD-ROM [...]

Lyrtech (1)Mid-size AdvancedMC for MicroTCA and AdvancedTCA platforms
Features (see all):
Features (see all):- Choice of powerful LXT and SXT Virtex-6 FPGAs
- High-pin-count VITA 57.1 FMC expansion site for I/Os
- DDR3 SODIMM interface to upgrade system memory
- Supports multiple switch fabrics (PCIe, SRIO, XAUI, GigE)
- Comprehensive line of software development tools
- Support for AMC R2.0 and R1.0 through onboard clock switch
- Available GTX base clocks – 100 MHz, 500 MHz, 625 MHz
- Fabric clock – RX or TX (100 MHz PCIe, default)
- IPMI controller (Pigeon Point)
- The ADAC250 is equipped with two 14-bit, 250 MSPS ADCs and two 16-bit, 1 GSPS DACs [...]

MEN Micro Elektronik GmbH (7)ESMexpress System-On-Module Standard, a new computing standard in development to be the ANSI-VITA 59 (RSE Rugged System-On-Module Express) Standard
Features (see all):

Features (see all):- ESMexpress brings the cost and time savings of Computer-on-Modules (COMs) technology to rugged, harsh and mission-critical environments
- RSE, Rugged System-On-Module Express (ANSI-VITA 59 in process)
- Z530 or Z510, up to 1.6 GHz
- Up to 1 GB DDR2 SDRAM
- Up to 2 PCI Express
- Up to 1 GbE
- One SATA port, eight USB 2.0
- SDVO, LVDS
- HD Audio
- -40 °C to +85 °C screened
- Conductive cooling [...]


Rugged 3U CompactPCI family of two single board computers (SBCs) and a rack [...]
A 1.5 GHz PowerQUICC III MPC8548-based SBC
Features (see all):
Features (see all):- Designed for communications applications, the module is similar to a PICMG-sized COM board at 95 mm x 125 mm
- Dissipating only 12 W and operating over -40 °C to +85 °C, the board is also coated for humidity protection and all components are soldered for shock and vibration tolerance
- Up to 2 GB of DDR2 SDRAM with ECC, nonvolatile SRAM and Ferroelectric RAM (FRAM), six USB ports, three 1 GbE ports, three SATA ports, and a x1/2/4/8 lane PCIe link
- Base carrier adds more functionality and breakout connections [...]

A 6U CompactPCI single board computer (SBC) that combines Intel’s multiport technology with a flexible mezzanine card extension and rugged design
Features (see all):

Features (see all):- Intel Core 2 Duo T7400 or L7400, Core Duo T2500, U2500 or L2400
- PCI Express five x1 links
- 4 HP system master or stand-alone
- 32-bit CompactPCI
- PICMG 2.16 via mezzanine card, Video via VGA and 2 SDVO, HD audio via mezzanine, Up to 6 USB and 4 UARTs via mezzanine
- Up to 4 GB DDR2 DRAM soldered
- 2 SATA, 1 PATA interface
- Up to 4 GbE, 1 XMC or PMC, 1 mezzanine card slot
- Board controller [...]


MM50 incorporates the high processing capabilities and exceptional power dissipation of PowerPC into a flexible, compact COM (computer-on module) board
Features (see all):
Features (see all):- MM50 ESMini module uses a PowerPC MPC5121e or a MPC5123 processor
- 760 MIPS
- Memory Managment Unit
- Floating Point Unit
- Rugged, ultra-small form factor module is ideal for use in mobile applications [...]

MEN Micro Inc. has launched its new, ultra-rugged MIPIOS product line with the Intel Atom-based RC1, a fanless box computer that provides up to 1.6 GHz of processing power
Features (see all):

Features (see all):- The RC1 is available as standard either with a 3.5" 4:3 color TFT LCD touch panel with a resolution of 640x480 pixels, 262,144 colors and touch functionality for service purposes or without a display
- All I/O interfaces, including two Fast Ethernet interfaces and a service interface with USB and RS232, are accessible at the front via robust 8-pin M12 connectors
- A second power input makes it possible to connect a backup power source, such as a battery, to add reliability in the event of a power failure
- The 512 MB RAM and 2 GB Flash memory offer sufficient space for all applications
- The rugged computer complies with the EN 50155 railway standard, fulfills IP67 and has an E1 approval from the German Federal Motor Transport Authority
- It is [...]


Ruggedized panel PC
Features (see all):

Features (see all):- Cost-effective DC1 combines the new Intel Atom processor with aluminium construction to provide a low power, highly reliable computer
- 15" 4:3 TFT LCD panel
- Rugged aluminium enclosure
- Fanless and maintenance-free design
- Intel Atom processor 1.6 GHz
- 1 GB RAM, 4 GB flash disk
- Two Fast Ethernet, two USB
- Embedded Windows XP image
- Wide-range PSU 9 V to 36 VDC 35 W
- Operation temperature -40 °C to +70 (+85) °C
- IP 65 compliant (front)
- EN 50155 compliant [...]


Mercury Computer Systems, Inc. (4)The Ensemble MPC-102 Dual-Core 8641D AMC Module combines dual-core processing power and flexible I/O for AdvancedTCA and MicroTCA (µTCA) platforms
Features (see all):
Features (see all):- Dual-core Freescale MPC8641D processor running at up to 1.33 GHz, combined with memory and I/O options for maximum application flexibility
- Single-width AdvancedMC, either mid-height or full-height, differing only by faceplate
- Includes an IPMI controller, firmware, and IPMI links for chassis management-based control and configuration
- Fully compatible with both AdvancedTCA and MicroTCA Ensemble platforms
- Switch-fabric communications can use either RapidIO or PCI Express
- Well suited to provide high-performance computing for applications as diverse as wireless base stations, wafer lithography, and test and measurement in telecom, industrial control, silicon inspection, and other industries [...]

Six-slot MicroTCA chassis
Features (see all):

Features (see all):- Six AMC bays with a wide range of fabric and clock options
- Supports six single-width, mid-height AMCs or a combination of mid/full-height and single/double-width AMCs
- Gigabit Ethernet base interface
- Choice of RapidIO, 10 Gigabit Ethernet, and PCI Express fabric connectivity
- Built-in system manager with full MicroTCA Carrier Hub functionality
- Supports point-to-point connectivity for SATA and SAS interfaces [...]


A dual-core 8641D AMC module
Features (see all):
Features (see all):- Offers Serial RapidIO or PCI Express connections to the carrier card, along with four GbE connections (two to the panel and two to the AdvancedMC connector), a SATA port, and dual RS-232 connections
- Up to 10 Gbps raw I/O bandwidth on Serial RapidIO
- 1.3 GHz PowerPC
- 2 GB DDR2 SDRAM
- Ideal for networking applications that process radar or sonar data [...]

An Intel Core 2 Duo based Advanced Mezzanine Card (AdvancedMC)
Features (see all):

Features (see all):- Provides modularity for demanding telecom and military communications
- Suited for processing and communications heart of AdvancedTCA or MicroTCA systems
- Maximum I/O with up to 16 AdvancedMC Fat Pipes connected
- Flexible I/O with FPGA ready for multiple XAUI, RapidIO, and PCI Express
- Suited for embedded computing and control tasks [...]


MicroBlade (3)Includes the world's first 1U MicroTCA enclosure
Features (see all):
Features (see all):- Compact 1U height form-factor with superior side-to-side cooling
- 20-layer backplane that has been optimized to reduce signal integrity issues
- This prototyping system includes two essential modules, including the JTAG Switch Module (JSM) and the 380 W MicroTCA Power Module
- Optionally it can include high-performance: MCH, Pentium Processor AMC, and hard disk drive AMC [...]

International AC Power Module will allow MicroTCA system integrators to break away from the limitations of DC input as the only viable option
Features (see all):
- The industry-leading full-size (6HP)/single-width form factor allows for painless replacement of any MicroTCA compliant power module
- Power levels up to 800 W will ensure even the most demanding of applications can benefit from the ubiquitous availability of AC power [...]

Testing and diagnostics module that allows you speed and agility during design, manufacture and operation
Features (see all):
Features (see all):- Provides JTAG vector testing, remote programming of FPGA logic, executable software
- Jaguar can help you troubleshoot design defects and diagnose programming errors in the field
- The module can be programmed to check datastream traffic, find the problem, and upload the fix all from a remote location
- The unit features 20 JTAG testable loads and 1 MB of test vectors or software/firmware uploads
- Optional OEM module configuration with IPMB-0 [...]

Molex, Inc. (6)Fully redundant 10 Gbps MicroTCA backplane
Features (see all):

Features (see all):- 10 Gbps performance on each high speed pair
- Press fit connectors for ease of assembly and repair
- 12 payload slots (10 full height or 8 full height + 4 compact slots)
- 18 layers
- Redundant power supply and MCH connections
- All fabrics and clocks fully wired [...]


Press-fit 10 Gbps edge card connector for MicroTCA backplanes
Features (see all):

Features (see all):- Press-fit for ease of assembly and repair
- Stitched contact design is amenable to high-speed connector assembly, reducing cost and offering high capacity
- Connector and footprint design optimized for 10 Gbps performance
- Molex offers populated backplanes as well
- No need for mounting pegs, freeing up this area for routing channels under the connector
- Pin spacing suitable for 2 pair routing channels
- Flat rock press-in requires no special tooling [...]


Development chassis with the Molex MicroTCA backplane and connectors
Features (see all):

Features (see all):- Small 4U chassis suitable for desktop or benchtop use
- (7" x 17.25" x 10.63") (178 mm x 438 mm x 270 mm)
- Cooling air enters from all sides, minimizing the space required for fans
- Configured for single wide AdvancedMC modules
- Redundant power and MCH slots
- 18 layer backplane for low cost
- 10 Gbps speed per differential pair
- AC-DC power supply on rear of chassis can accept 120 V or 240 V input
- Supports 1200 watts - delivers 48 volts to connectors on the front of the chassis
- 12 payload slots (10 full height, or 8 full height + 4 compact slots)
- Removable fan tray has 10 high performance 12 V fans for a uniform, turbulent air flow in all slots [...]


Meets MicroTCA requirements
Features (see all):
Features (see all):- Easy press-fit termination
- Cost effective terminal design
- Excellent high speed differential performance
- Second source available
- Product can be configured to serve many other high speed interconnect needs [...]

Backplane for single-wide AdvancedMC cards, 0.42 by 0.12m (16.82" by 5.00")
Features (see all):
Features (see all):- 4 compact slots which allows either 10 full-height slots or 4 compact and 8 full-height slots (12 total)
- Power system supports 80 watts per slot - the maximum allowed by the MicroTCA 1.0 specification
- Connectors for 2 power supplies and 2 MCHs for testing of handoff features when one power supply or MCH fails
- MicroFit 3.0 14-circuit, blind mate, fan tray connectors provide hot-swappable fan trays for redundancy
- Design easily scalable to meet different customer applications and needs AdvancedMC B+ [...]

Small chassis is a convenient size: 17.25" wide x 7.13" high x 10" deep (438 x 181 x 254 mm)
Features (see all):
Features (see all):- Air input from all 4 sides; exhaust from 3 sides and the top enables full cooling functionality in 4U height
- 4 compact slots to allow either 10 full-height slots or 4 compact and 8 full-height slots (12 total)
- Slide-out fan tray with 10 fans makes repairs easy
- 10 Gbps backplane installed for direct comparison of Molex to other backplane solutions in a similar card cage
- Power supply on rear converts 110 or 220 V AC to 48 V DC that is wired to the front [...]

N.A.T. GmbH (4)Full PCIe and SRIO support
Features (see all):
Features (see all):- All fabrics can be scaled to individually support 6 or 12 AdvancedMCs in a MicroTCA system
- Harting Plug on all all four tongues, massively reducing the required insertion or extraction force and improving the mechanical fit as well as the electrical connection to the MicroTCA backplane
- Firmware has been upgraded to fully support redundant environments with redundant MCHs and Power Modules
- The new firmware also offers access by external system managers via backplane and face plate GbE
- Also supports MicroTCA systems that do not fully comply with the standard
- Both the new hardware and firmware has been successfully qualified in interoperability tests with all major backplane vendors and AdvancedMC and power supply manufacturers
- Fully complies with the applicable PICMG MicroTCA.x and PICMG AMC.x specifications in their most recent release [...]

Telecommunication interface board NAMC-8E1/T1/J1 in Advanced Mezzanine Card (AdvancedMC) compact, mid- and full-size form factor for price-sensitive MicroTCA and AdvancedTCA systems
Features (see all):
Features (see all):- For telecom applications with extensive need for a high aggregation of multiple E1/T1/J1 interfaces combined with access to switched networks based on high-bandwidth Ethernet
- Provides 8 or 16 primary rate interfaces at the front panel
- Optimized to occupy minimum space (compact size) or maximum amount of channels (up to 16) for full size
- The mid size version is available for AdvancedTCA carrier cards and 19-inch MicroTCA systems with 12 mid-size AMC slots
- Simplifies the conversion of the TDM-based ISDN data streams into packet-based Ethernet networks by NAT’s highly sophisticated TDM-to-ITDM converter
- The NAMC-xE1/T1/J1 only needs a Gigabit Ethernet infrastructure in the backplane of the MicroTCA system for control and data pa [...]

MicroTCA Carrier Hub
Features (see all):
Features (see all):- Single-width double-height Advanced Mezzanine Card
- Central management and data switching entity for all MicroTCA systems
- Base module and numerous optional daughter cards which can be mounted on the base module
- MicroTCA.0 R1.0 compliant
- Delivers switching and hub functionality for the various system fabrics as defined in the AMC.x standard series, such as Gigabit Ethernet, PCI Express, Serial RapidIO, or Serial Attached SCSI (SAS)
- Can also provide a centralized clock distribution to all AdvancedMCs in the system
- Freescale ColdFire at core frequency of 200 MHz
- 32 MB SDRAM and 16 MB FLASH memory
- Linux operating system
- Layer 2, non-blocking, low-latency Gigabit Ethernet switch, supporting VPN as well as a port based rate control
- Supports Fabric A according to MicroTCA.0 R1.0 and PICMG SFP.1 R1.0, serving up to 12 AdvancedMCs as well as the update channel from the second MCH in [...]

The NAT-MCH can be equipped with different Fat Pipe Fabric modules for PCIe, SRIO, and 10 GbE, fulfilling the demand for high-performance data paths within a MicroTCA system
Features (see all):

Features (see all):- Different clocking options provide all clock signals for telecom and non-telcom applications
- These flexible configuration options make the NAT-MCH a suitable choice for any kind of application
- The following Mezzanine options are available: Clock Mezzanine; Telecom and Fabric Clocks ; Clock Mezzanine with additional SATA switch; PCIe Hub Mezzanine (AMC.1); SRIO Hub Mezzanine (AMC.4);10 GbE Hub (XAUI) Mezzanine (AMC.2) [...]


NEI (1)An economical and flexible MicroTCA platform ideal for applications with lower capacity and less stringent performance and availability requirements
Features (see all):

Features (see all):- Allows for a maximum number of AMC slots in a 3U form factor using a horizontal backplane design
- Support up to four double-wide and two single-wide AMCs or a total of ten single-wide AMCs; two AMC slots are dedicated for MCHs
- Power available in either 400 W AC or 600 W -48 V DC
- Dual-star topology provides up to 10 GbE fabric speeds
- Fully integrated and tested using MCHs with clocking, console connectivity, and two network connections for connecting chassis together or connecting to a network
- Dual, redundant hot swap power [...]


Nextronics (2)MicroTCA.0, single shelf MicroTCA subrack
Features (see all):
- 21 mid-size slots
- RoHS compliant steel
- Extension area for custom design
- Fan tray and filter trays included
- Cardguide plate instead of single card guides [...]

MicroTCA.0, single shelf MicroTCA subrack
Features (see all):
- 21 mid-size slots
- RoHS compliant steel
- Extension area for custom design
- Cardguide plate instead of single card guides [...]

Orbit Micro (1)Rugged Portable seven-slot Industrial Workstation with AMD Athlon 64 X2/FX processor, 6x removable hard drive trays and a 20.1” LCD
Features (see all):

Features (see all):- Rugged Portable System with 20" 1,600 x 1,200 LCD
- AMD Athlon 64 FX/X2 Dual-Core Processor
- Up to 8 GB of 800 MHz DDR2 memory
- Hot-swap storage with onboard RAID 0, 1, 5, 0+1 Capabilities Available
- 1x PCIe-16, 1x PCIe-4, 2x PCIe-1, 3x PCI 2.2
- Four USB 2.0 ports [...]


Performance Technologies (11)1U MicroTCA application-ready solution featuring an AMC121 Intel Core 2 Duo compute module and NexusWare Linux software
Features (see all):

- 1U MicroTCA platform supporting up to six AdvancedMC modules
- Designed for deployments in telecom, aerospace and defense, enterprise, and commercial applications
- Integrated AMC121 Intel Core 2 Duo Module with 2 GB DDR and 2 GB miniSD Flash
- Integrated NexusWare Linux Trial Version
- Integrated Ethernet switch with Dual 1 GbE Uplinks
- Integrated MicroTCA Carrier, Shelf Managers, and PCI Express switch
- Front-to-Back, Push/Pull Cooling
- Power and Cooling Supports up to 40 W per mid-size, single AdvancedMC module
- AC or DC Power Input Options
- Telecom Clock Support
- Fully compliant with MicroTCA.0, AMC.0, AMC.1, AMC.2, and AMC.3 [...]


Performance Technologies’ MicroTCA™ platform family consists of highly integrated 1U platforms; each supporting up to six mid-size, single AdvancedMC™ (AMC) modules. Innovative architecture maximizes payload slot density, while minimizing overhead costs by incorporating platform infrastructure functions such as the Ethernet switch, PCI Express® switch, carrier/shelf manager, and power supplies into the rear of the chassis. The chassis are the first 1U MicroTCA platforms to feature front-to-rear cooling; making them ideal for NEBS specified installations. Both PCI Express® and Ethernet switching are supported to each slot, while storage is accommodated by direct SATA/SAS slot-to-slot connections between the AMC sites. The onboard platform management subsystem provides MicroTCA compliant carrier and shelf management. Performance Technologies’ MicroTCA solution set is rounded out by a line of cost-effective and high-per [...]
Remote systems management with NexusWare Portal, RMCP, and SNMP interfaces
Features (see all):
Features (see all):- Designed for telecom, aerospace and defense, enterprise, as well as commercial applications
- Supports a wide range of processing capabilities
- Integrated NexusWare® Linux® Operating System
- Integrated Ethernet switch with dual 1 GbE uplinks
- Integrated PCI Express® switch
- Integrated MicroTCA carrier and shelf managers
- Front-to-back, push/pull cooling
- AC or DC power options
- Cooling supports up to 40 W per mid-size, single AdvancedMC™ (AMC) module
- Telecom clock support
- Fully compliant with MicroTCA.0, AMC.0, AMC.1, AMC.2, and AMC.3 [...]

A highly integrated 1U MicroTCA platform supporting up to six mid-sized AdvancedMC modules
Features (see all):

Features (see all):- Designed for Deployment in Telecom, Defense, Aerospace, Enterprise, and Commercial Applications
- Integrated Ethernet Switch with Dual 1 GbE uplinks
- Integrated PCI Express switch
- Integrated MicroTCA carrier and shelf managers
- Front to rear, Push/Pull cooling
- Power and cooling support up to 40 W per mid-sized, single AMC module
- AC or DC power input options
- Fully compliant with MicroTCA.0, AMC.0, AMC.1, AMC.2, and AMC.3 [...]


The CPC5900 is a high availability NASor SANstorage blade solution for CompactPCI, PICMG 2.16 systems supporting 800 GB of storage
Features (see all):

Features (see all):- Each blade features two 3.5" enterprise SATA hard drives with both board-level and drive-level hot-swap for complete flexibility, high reliability, and high storage capacity
- The onboard high-performance PowerPC processor operates on Performance Technologies’ NexusWare CGL 4.0 registered/ POSIX compliant Linux development environment
- Block Disk I/O is supported over iSCSI for SAN applications and File I/O is supported using NFS and SAMBA for NAS applications
- Network connectivity is provided by dual Gigabit ports connected to the PICMG 2.16 Ethernet backplane [...]


Wide range of mid-size, single form factor AMC modules suitable for use in AdvancedTCA and MicroTCA systems
Features (see all):
Features (see all):- Single or multi-core compute modules with PowerPC or x86 chipsets
- Video/audio/storage module with multimedia video, PCM, and Dolby Digital 5.1 audio, and SATA/SAS hard drive
- Intelligent WAN communications module with four high-speed channels at 2 Mbps per port
- Integrated NexusWare CGL OS and development environment
- Support for Linux, Solaris, or Windows operating systems [...]

AdvancedMC Single Board Computer 2.16 GHz Intel Core 2, dual-core architecture
Features (see all):

Features (see all):- Supports up to 8 GB DRAM
- Onboard MiniSD card site with program and operating system storage space enabling the module to boot without an external connection
- TCP/IP Offload (TOE), iSCSI, RDMA on Ethernet Channels
- Enhanced Intel SpeedStep technology for more efficient power management
- Low latency, high bandwidth
- Compatible with Performance Technologies’ MicroTCA platform, the MTC5070
- Can be fully preintegrated using the company’s Linux OS and development environment, NexusWare [...]


32-bit AdvancedMC compute module designed for high-performance embedded applications
Features (see all):

Features (see all):- Freescale Dual-Core 1 GHz MPC8641D PowerPC Processor
- Mid-size, single compute module
- High-performance computing solution for AdvancedTCA and MicroTCA systems
- Up to 2 GB ECC DDR2 SDRAM
- Four GbE interfaces
- AMC .0, .1, and .2 compatible
- MiniSD Site for Onboard Program and OS Storage
- Supports Both 32- and 64-Bit Operating Systems incluiding NexusWare CGL [...]


Intel Integrated Processor AdvancedMC module, 64-bit 333.5 MHz PC2-5300 with Error Correction Code (ECC) Intel EP80579 1.2 GHz Integrated processor
Features (see all):

Features (see all):- EP80579 1.2 GHz Pentium M processor
- Up to 4 GB PC5300 DDR2 memory with ECC
- 3 Gigabit Ethernet Ports 0 and 1
- Dual SATA II Interface Ports 2 and 3 and onboard SATA Flash module up to 16 GB
- USB 2.0
- PCI Express x1, x4, or x8, Port 4-7, 8-11 [...]


High-performance computing solution for AdvancedTCA and MicroTCA systems
Features (see all):

Features (see all):- Single board compute module designed for high-performance embedded applications
- 64-bit single-core AMD Turion 2.0 GHz processor
- Mid-size, single compute module
- 64-bit memory addressability to 4 GB
- PC3200 DDR SDRAM with ECC
- Supports Both 32- and 64-bit operating systems: Linux x64, Windows XP x64, Solaris 9/10 x64
- Full compliance with AMC.0 R1.1 specifications [...]


Intelligent Synchronous WAN Communications Module
Features (see all):

Features (see all):- Multipurpose Intelligent Synchronous WAN Communications Module for AdvancedTCA and MicroTCA Systems
- Mid-Size Single AMC Module
- Full Compliance with AMC.0 R2.0, AMC.1 R1.0, and AMC.2 R1.0 Specifications
- Four High-speed Channels Capable of Sustaining 2 Mbps per Port
- Freescal MPC8270 PowerQUICC® II Processor
- 128 MB Dedicated Processor SDRAM Memory- Handles Extensive Onboard Traffic and Protocol Requirements
- 32 MB Application Flash
- NexusWare WAN Protocol Software: Radar Receiver, TADIL-B, HDLC, X.25, Frame Relay, ASYNC
- NexusWare CGL OS and Development Environment
- Broad Operating System Support Includes Solaris, Windows, and Linux [...]


Pigeon Point Systems (1)Provides the key by rendering all firmware needed for FPGA development with the aim of quicker deployment of AMC products
Features (see all):
Features (see all):- Includes a benchtop management controller development board in AMC form factor style and a full SmartFusion FPGA design tucked inside a Libero Integrated Design Environment (IDE)
- Also includes a production license and “comprehensive documentation”
- Two benchtop variants of the kit: One for MicroTCA, one for AdvancedTCA
- The kit’s foundational product is the SmartFusion intelligent mixed-signal FPGA product including built-in flash
- Composition: an FPGA, programmable analog, plus a 32-bit ARM Cortex-M3-based Microcontroller Subsystem (MSS) at 40 MHz
- ARM processor experiences zero load while SmartFusion renders advanced analog processing, leaving the processor to execute xTCA analog sensor monitoring [...]

PMC-Sierra (1)Carrier-class 16-port Serial RapidIO switch capable of scaling up to 10 Gbps per port; suitable for AdvancedTCA- and MicroTCA-based wireless infrastructure platforms
Features (see all):

- Scalability, with 16 ports running up to 10 Gbps per port to deliver a single-chip solution for AdvancedTCA and MicroTCA-based platforms
- Protection and diagnostic features for carrier grade applications
- Enhanced Quality of Service features for high performance systems
- Industry-leading SERDES technology for guaranteed signal integrity
- Implements Serial RapidIO, a scalable, low overhead, high-performance interconnect protocol
- Very low-delay, with latency less than 100 ns for time-sensitive data distribution and feedback
- Supports strict priority and FIFO methods of traffic prioritization, and includes additional features to allocate bandwidth and to provide fairness in multi-stage architectures
- Feature enhancements for improved reliability i [...]


Polaris Networks (3)Conformance test tools for AdvancedTCA, MicroTCA, and AdvancedMC technologies to assist TEM and system integrators in testing interoperability of building blocks and reduce development and integration time
Features (see all):

- Test cases as per PICMG specification requirement
- The testers have been selected by CP-TA for certification testing
- Stop or continue on error/warning/info
- Test scripts of MicroTCA and AdvancedMC Tester are available in source code form and are editable
- New tests may be developed by user in MicroTCA and AMC test tools
- Complete Decode of packets sent or received during the test run using the Miniscope Decoder
- Interactive (Operator-driven) and Automatic tests
- Test reports in HTML format with target Device information in MicroTCA and AdvancedMC Test Tools and in text format in the case of AdvancedTCA Tester
- Test environment may be saved for post-test analysis in MicroTCA and AMC Test Tools and in Adva [...]


Automated test suite for testing the hardware-management software implementation in MicroTCA-based building blocks or systems
Features (see all):
Features (see all):- Designed for telecom equipment manufacturers, board-level product manufacturers and system integrators, who wish to reduce the time and resources spent on MicroTCA testing, during the development and regression-testing of building blocks or during system integration
- Helps meet interoperability and certification requirements of their systems for compliance with the MicroTCA certification suite
- By checking the compatibility of building-blocks (MCH, chassis FRUs, boards, mezzanine, OEMs) with respect to MicoTCA system management requirements, and by testing all building blocks in an integrated system, independently or simultaneously, the MicroTCA Tester enables you to increase interoperability of building blocks and decrease development and integration time [...]

Automated test suite is designed specifically for vendors to test Hardware Platform Management software development for AdvancedMC
Features (see all):
- Fully compliant with PICMG specification AMC.0 R2.0.
- suited to help vendors meet the needs of certification and interoperability
- The AMC Tester, which complements Polaris’ existing range of AdvancedTCA and MicroTCA testers, is now commercially available
- More than 60 test scripts for testing mandatory carrier requirements and AdvancedMC management implementations
- The tester has an easy-to-use Windows interface and complete source codes for test scripts are available, which helps users customize tests according to their requirements
- Built-in Miniscope Protocol Analyzer aids the debugging process during system development and integration, reducing the time and resources spent, significantly [...]

Positronic Industries (3)7W2 variant meets µTCA 48 V input requirements
Features (see all):
Features (see all):- 9W4 variant meets µTCA 12 V input requirements
- Dual port right angle PCB mount connector simplifies manufacturing
- A “uni-port” version is also available
- Crimp contact cable connectors offer ultra low profile backshells, allowing ease on in-cabinet cable routing [...]

Power connector for use in MicroTCA power modules for power input
Features (see all):
Features (see all):- Board mount connectors for power modules, and cable connectors for bringing power to modules
- Meets requirements of the MicroTCA Specification for 48 V and 24 V systems [...]

Positronic offers all power input connector variants for MicroTCA Systems
Features (see all):

Features (see all):- The PCI Industrial Computer Manufacturers Group recently released an addition to the MicroTCA family of specifications
- The Air Cooled Rugged MicroTCA specification extends MicroTCA into applications beyond its original telecommunications focus
- MicroTCA specification developers choose rugged and reliable combination D-subminiature connectors as the power input interface
- MicroTCA uses specific connector variants for various input voltage levels: 7W2 variant – 48 V; 9W4 variant – 24 V; 5W5 variant – 12 V; 15W4 high density variant – 12 V; Positronic’s QB series offers all four Combo D variants included in the MicroTCA specifications and offers a variety of features
- Single or stacked dual port package
- Right angle PCB mount connectors offer standard mounting brackets or a unique “low profile” design which reduces the height of connectors [...]


RadiSys Corporation (1)10 Gigabit (16 slot) AdvancedTCA Application Ready Platform
Features (see all):

Features (see all):- Application ready platform to address next generation requirements for RNC/BSC, Media Gateways, IMS and IPTV infrastructure
- Meet capacity and throughput requirements easily with advanced technologies such as 10 Gigabit Ethernet, Dual-core processing, media processing, and NPU-based wire-speed 10 Gbps line cards
- 16-slot capacity provides the maximum number of billable application slots in an ATCA carrier-grade platform
- Improve economies of scale and reduce development expense with the common managed platform with flexible configuration options for building blocks and software to enable multiple applications with single platform architecture
- Migrate easily to MicroTCA architecture using the modularity of the AMCs and software architecture in the platform
- SAForum HPI 1.1 compliant APIs enables platform independent middleware and applications
- NEBS [...]


Radstone Embedded Computing (1)Rugged 24-port fully managed GbE switch with PICMG 2.16 compliance
Features (see all):

Features (see all):- 10 Gigabit uplink ports for expansion
- Layer 2/3 switching with advanced support for VLANs, QoS, and IPv6
- PICMG 2.16 compliant
- 88 Gbps nonblocking switch fabric with full wirespeed performance
- Configuration through Web interface
- Expands to 48-port nonblocking solution
- Unmanaged version also available
- Air- and conduction-cooled [...]


Rittal Corporation (1)A MicroTCA system that accommodates AdvancedMC cards
Features (see all):
Features (see all):- 2U, 3U, and 5U (high) configurations
- Can be filled with multiple slots
- Built-in fan aids shelf cooling to keep AMCs cool in 3U and 5U versions
- Enclosure can be mounted in a standard 19" (482.6 mm) rack and extends to a depth of only 200 mm
- MicroTCA chassis complies with PICMG AMC.0 and MTCA Draft 0.86 [...]

SANBlaze Technology, Inc. (3)The SB-AMC-HD module is a drive carrier module for AdvancedTCA or MicroTCA systems
Features (see all):

Features (see all):- Configured with either one 2.5 inch SATA or one SFF SAS drive
- AdvancedMC hard drive module
- Support for SATA or SAS drives
- SAS storage options of 36G or 73G
- SATA options up to 100G
- Extended duty drive options
- Integrated IPMI
- RoHS compliant [...]


AdvancedMC Solid State Drive Module
Features (see all):

Features (see all):- Rugged, high capacity, high throughput, mission critical AdvancedTCA and MicroTCA storage design requirements
- Storage options up to 64 GB
- Nonvolatile memory and no moving parts
- Up to 40 MBps sustained read/write rate
- Extending environmental ranges
- AMC.3 compliant [...]


Advanced Mezzanine SAS Adapter
Features (see all):

Features (see all):- 8 SAS/SATA ports
- 3 Gbps per port
- Integrated RAID 0, 1, 1E, and 10E
- 8 Lane PCI Express backplane connection
- Connects up to 122 total end points
- AdvancedTCA and MicroTCA based system designs [...]


Scan Engineering Telecom (2)The SMCH-100 can be used in any MicroTCA-compliant system as a central control, monitoring and switching unit
Features (see all):
Features (see all):- Due to its modular design the SMCH-100 allows customers to build full scalable MicroTCA-compliant systems by selecting only required features
- The SMCH-100 has a MicroTCA Carrier Management Controller (MCMC), which supports and manages up to 12 AMCs, 2 Cooling Units (CUs) and up to 4 Power Modules (PMs)
- SMCH-100 supports RMCP and HPM.1 interfaces as well as a redundant PM option and Real Time Clock
- The SMCH-100 is also equipped with Layer 2, non-blocking, low-latency Web-managed Gigabit Ethernet switch, supporting VLAN, port-based access control and 4 Qualities of Service (QoS) per port, serving up to 12 AMCs, and Fabric Switching option that allows PCIe or Serial RapidIO (SRIO) connectivity for up to 12 AMCs
- IPMI v1.5 compliant control and monitoring console and Web-managed system supports up to 12 [...]

High-performance computing module for use in AdvancedTCA and MicroTCA systems
Features (see all):
Features (see all):- Designed around Intel’s x86-based Core 2 Quad processors, it provides exceptional computing power and performance in the convenient and versatile AdvancedMC form factor
- The SAMC-504 complies with the most current PICMG specifications for operation in AdvancedTCA and MicroTCA applications
- This module supports sub-specifications to insure compatibility with the broad set of interface options including SAS/SATA, Ethernet and PCI Express
- Onboard SATA SSD disk drive
- Scan Engineering Telecom can also provide customization, turnkey integration and support to ensure that OEMs can focus where they prefer to add their own unique value
- AMC.0 R2.0 compliant fan-less module
- Quad-Core Intel Core 2 Quad CPU scalable up to 2.2 GHz
- Server-class chipset Intel3100 with 800 MHz FSB
- Up to 4 GB SO-RDIMM RAM with ECC
- Up to 128 GB onboard Flash [...]

Schlegel Electronic Materials (2)PICMG 3.0 fully compliant UL 94-VO EMI gasket for both AdvancedTCA and MicroTCA applications
Features (see all):
- Low Compression Soft Foam
- RoHs and WEEE compliant
- Dual PSA and easy peel wide release liner
- NiCu fabric
- Can be supplied in any length up to 84"
- 96 db average 20 MHz - 10 GHz [...]

Schlegel Electronic Materials introduces DYNASHEAR, an innovative EMI shielding gasket family in full compliance with PICMG specifications for the AdvancedTCA and MicroTCA environment, which is able to offer superior features over metal fingerstocks and current Fabric-over-Foam gaskets
Features (see all):
Features (see all):- High level of shielding effectiveness even when submitted to large compression variations
- Excellent compression load/deflection ratio due to a new low memory ultra-soft foam formulation
- Highly flexible abrasion resistant conductive fabrics
- Gasket profiles are available in 5 widths and 6 different heights
- DYNASHEAR is safe and easy to incorporate into any existing or new programs
- Shielding Effectiveness: NiCu-C70: 96 dB (average); 20 MHz/10 GHz per Mil DTL 83528 C
- NiCu-C12: 97,4dB (average); 20 MHz/10 GHz per Mil DTL 83528 C
- Compression Force: 0.70 lbs/inch at 40 percent compression
- Flammability: UL94-V0
- Abrasion Re [...]

Schroff a Brand of Pentair Electronic Packaging (9)The MicroTCA 6U x 19" rack-mount system with redundant cooling units and 9+2+2 AdvancedMC slots
Features (see all):
Features (see all):- The shelf provides two cooling units, one lower and one upper for a push-pull configuration
- The air intake is located at the bottom front of the chassis
- The removable air filter is directly above the lower cooling unit, just below the subrack
- Air exhausts out the top side and rear of the system
- 6U x 19" Redundant Cooling System
- Nine AdvancedMC full-size slots (6HP)
- Two MicroTCA Carrier Hubs (MCH) slots (6HP)
- Two Power Modules (PM) slots (9HP)
- Two Cooling Unit (CU) connectors
- Compliant to PICMG MicroTCA Base Specification [...]

Using the features of AdvancedMC, MicroTCA provides high performance and high availability in one system
Features (see all):
Features (see all):- Meets PICMG MicroTCA.0 R1.0 Specification
- Allows for 12x single, mid-size AdvancedMC and 2x single, full-size MCH modules
- 2x MicroTCA power module slots with options for up to 12 HP per module
- Backplane, dual star connection for GbE and fat pipe/extended fat pipe, direct connections for the storage interface
- Active cooling via 2x rear pluggable Cooling Units (CU) for front-to-rear cooling, each CU has a Schroff Enhanced Module Management Controller (EMMC)
- Front removable air filter and upper fixed cable management [...]

Proven MicroTCA hardware, card guides, EMC gasket, subrack assembly
Features (see all):
Features (see all):- Table-Top and Side-Mount Cube Systems
- 1U thru 8U rack-mount systems with redundant cooling solutions and EMMC onboard
- Solutions with fixed AC Power Entry and other power configuration options
- Backplane design and manufacturing for lower layer count and high performance
- Customization for point-to-point routing for cost and performance optimization
- Engineered thermal solutions using FloTherm simulations and empirical testing
- Proof-of-Concept ruggedized AMC hardware and hardened MicroTCA Enclosures, including conduction-cooled ATR
- Modular power management schemes for full compliant and options for low-featured, cost-effective power management
- Units in stock for immediate delivery [...]

The MicroTCA Industrial PC allows for the installation of four single, full-size AdvancedMC modules
Features (see all):
Features (see all):- To keep the costs low an open frame AC input power supply with +12V output is installed in the rear of the system and has its own cooling fan
- Cooling is achieved with a fixed fan in the rear with lower front air intake and rear exhaust
- Table top and rack-mount configurations available
- Four AdvancedMC slots with hot swap capability
- AC power input located at the rear
- PCIe switch routing from CPU slot to AdvancedMC slots [...]

The MicroTCA cube has four single full-size AdvancedMC modules and an MCH (MicroTCA carrier hub) slot
Features (see all):
Features (see all):- This product is ideal for small embedded, cost sensitive applications
- Dimensions are 175.85 mm W x 132.45 mm H x 315.5 mm D
- Conforms to PICMG MicroTCA.0 R1.0 Specificatio
- Enclosure for 4x single, full-size AdvancedMCs and 1x MCH module single, full-size
- Utilizes the aesthetically pleasing Schroff ratiopacPRO housing
- Backplane contains a star connection for Common Options GbE, Fat-pipe, and direct connections for the storage interface
- Switch-off power logic device for individual slots on the backplane
- Open frame power supply, 150 W, mains/line connection on the rear with IEC connector
- Active cooling via 2x fixed fans
- Optionally, a subrack system, 156.76 mm W x 150 mm H x 250 mm D is available with the same functionality for embedded enclosure applications [...]

MicroTCA system, 8U, 316 mm deep ratiopac PRO case with front handles (19-inch rack mounting brackets are optional)
Features (see all):
- Card cage for full-size, double (formerly double-width, full-height) AdvancedMC modules
- MicroTCA backplane, 14 slot (2+2+10, two power module slots, two MCH slots, 10 AdvancedMC slots) or 16 slot (2+2+12, 2x Power module slots, 2x MCH slots, 12x AMC slots)
- Active heat dissipation (front air intake, rear exhaust)
- Hot swap fan tray with 3 DC fans, 12 V, temperature controlled by temperature sensor
- Front removable air filter
- Power unit with one 300 Watt Power Module, 12 V/25 A Output, 85-264VAC Input (add additional Power Module for redundancy)
- Power Connection Module with 12 VDC input, 12 V and 3.3 V/5 A output
- DC power cable with D-SUB connectors to MicroTCA Power Connection Module [...]

MicroTCA system, 6U, 316 mm deep ratiopac PRO case with front handles (19-inch rack mounting brackets are optional)
Features (see all):
- Card cage for full size, single (formerly single width, full-height) AdvancedMC modules
- MicroTCA Backplane, 14 slot (2+2+10 , 2x Power module slots, 2x MCH slots, 10x AdvancedMC slots) or 16 slot (2+2+12 , 2x Power module slots, 2x MCH slots, 12x AdvancedMC slots)
- Active heat dissipation (front air intake, rear exhaust)
- Hot-swap fan tray with 3 DC fans, 12 V, temperature controlled by temperature sensor
- Front removable air filter
- Power unit with one 300 Watt power module, 12V/25A output, 85-264 VAC Input (Add additional Power Module for Redundancy)
- Power Connection Module with 12 V DC input, 12 V and 3.3 V/5 A output
- DC power cable with D-SUB connectors to MicroTCA Power Connection Module [...]

Adapter for CPCI 2.16 switch boards for Advanced TCA
3U MicroTCA shelf designed for maximum configuration flexibility
Features (see all):
Features (see all):- The backplane supports up to 10x single, full-size AdvancedMCs, 2x MCHs, and 2x 12HP power modules
- 3U x 19" rack-mountable
- Backplane supports 2x MCH slots, 2x PM slots, 10x AdvancedMC full-size slots, and 2x CU connectors (see topology sheet for more information)
- Active cooling via 2x front pluggable Cooling Units (CU) with EMMC on board with air flow from right to left
- Front removable air filter
- 4x splitters to allow customization of double slots into 2x single slots
- Custom configurations available upon request [...]

SIE Computing Solutions, Inc. (4)A complete AdvancedMC and MicroTCA development system that provides engineers with a cost-effective tool to aid in the design, development, and test of AdvancedMCs and MicroTCA systems
Features (see all):
- 1.75-inch (1U) (H) x 10.3-inch (W) x 7.7-inch (D)
- MicroTCA backplane supports AMC.0, AMC.1, AMC.2, AMC.3, AMC.4
- IPMI system manager creates a MicroTCA-like environment
- Integrated air filter, fan, and front replaceable fan tray
- External 100-240 VAC to 48.0 Vdc power supply included
- Utilizes CorEdge Networks technology [...]

MicroTCA chassis
Features (see all):
Features (see all):- Suitable for applications in VoIP nodes, modular telco line units, Wi-Fi and WiMAX radio boxes, Ethernet hubs, and fiber-to-the-curb optical network units
- Innovative power supply configuration
- 2U 19-inch rack mount configuration
- Single 6HP MicroTCA Carrier Hub
- 12-node backplane
- Backplane supports a range of customizable configurations for full- and half-height Advanced Mezzanine Card (AdvancedMC) slots
- Designed to include a low cost power supply
- Single fixed, rear-mount MicroTCA power controller
- The forced evacuation and pressurization cooling design manages temperature with eight fans for up to 40 watts per AdvancedMC slot [...]

Rugged line of enclosures offer 4 different types of construction designed to survive extreme conditions: rugged bolted, rugged welded, rugged full MIL, and rugged VMEC
Features (see all):
- All models feature configurable rear I/O and are EIA rack-mountable
- Can be designed and built around your specifications [...]

Rugged line of enclosures offer 4 different types of construction designed to survive extreme conditions: rugged bolted, rugged welded, rugged full MIL, and rugged VMEC
Features (see all):
- All models feature configurable rear I/O and are EIA rack-mountable
- Can be designed and built around your specifications [...]

Simon Industries (2)MicroTCA table-top development chassis
Features (see all):
- Well-suited for developing and debugging MicroTCA systems using full-height and half-height AdvancedMC modules
- Utilizing the Molex Dual-Star backplane, the Simon Chassis can facilitate hardware and software development, accelerate time to market, and allow developers to evaluate various AdvancedMC cards, power supplies, and MCH products
- Blind mating connectors to enable live replacement of the fan tray without powering down the chassis
- Molex press-fit edge card connectors combined with precise launch geometry, minimizing reflections and enabling 10 Gbps over each differential pair, allowing backplane to handle up to 4 times the bandwidth of other backplanes
- Spacing between pairs of at least 0.25 mm (0.010") to minimize crosstalk
- FRU ROM facilitates communication of all the important backplane characteristics to the MCH
- 4 compact slots, allowing either 10 full-heigh [...]

Cabinet Construction: Painted steel cabinet with stamped steel card guides
Features (see all):
Features (see all):- Height: 6.98" (177 mm) Standard 4U Width: 17.25" (438 mm) Depth: 8.50" (208 mm) without rear p/s Depth: 10.25 (260 mm) with rear p/s
- 1000 Watt rear-mounted 115/240 Vac input p/s
- -48 Vdc to one or two MicroTCA-specified in-rack supplies
- Available for order without p/s [...]

Surf Communication Solutions, Inc. (1)A RoHS-compliant AdvancedMC DSP resource board, preintegrated with AdvancedTCA and MicroTCA chassis
Features (see all):

Features (see all):- Provides flexible yet heavy-duty multimedia processing capabilities
- Complete media processing package for audio, video, modem, and fax
- Flexible and scalable modular design supporting up to 8 TI C64x DSPs onboard
- Carrier-grade, field-proven, and cost-effective
- Built-in diagnostics provide easier troubleshooting and better application control
- Can be provided as hardware-only solution for DSP-intensive applications [...]


TEWS Technologies LLC (2)High speed, high-performance A/D converter AdvancedMC with eight high speed ADCs, preprocessing power by a Virtex-5 FPGA, high speed on board memory for full bandwidth snapshots
Features (see all):

Features (see all):- Form factor: PCIMG AMC.1 Module, x8 PCI Express port (AMC.1 Type 8 compliant)
- Virtex-5 LXT FPGA
- 4 MB QDR-II SRAM
- Analog-to-Digital Converter: 8X LTC2254 ADCs, 105 MSps, 14-bit
- IPMI support [...]


The TAMC200, a standard double width mid-size or full-size AMC.1 compliant carrier can be used with 3 single-size IndustryPack (IP) modules
Features (see all):

Features (see all):- Double-width / mid-size or full-size AMC.1 compliant carrier for 3 IndustryPack modules
- IPMI V1.5 Support; 8/32 MHz IP interface, no DMA
- Routing of all IP interrupts on PCIe INTA/MSI, local interrupt status register
- Self healing fuses and RF-filtering for the power supply of the IndustryPack slots
- 68 pin SCSI-V type connectors and Status LEDs in front panel
- Operating temperature -40°C to +85°C [...]


Tracewell Systems, Inc. (1)Rugged conduction-cooled MicroTCA or CompactPCI system
Features (see all):
Features (see all):- Fully sealed
- Modular design
- EMI shielded per MIL-STD-461
- Supports up to 8 cards
- 30% better heat transfer vs standard conduction cooling scheme [...]

Trenton Technology Inc. (1)Trenton's MCP6792 incorporates the latest small form factor, chipset and multi-core processor technology. This AMC card is ideal for use in uTCA systems and on ATCA carrier cards.
Features (see all):

Features (see all):- Trenton’s MCP6792 supplies two 10/100/1000Base-T Ethernet interfaces to the AMC’s card edge connector. Other interfaces available on the card edge connector are one x4 and one x1 PCI Express link with five PCI Express reference clocks. A MicroTCA backplane or ATCA card may use the x4 PCIe link as four x1 PCIe links resulting in a total of five PCI Express links available for use in a system application with the Trenton MCP6792 AMC processor card. Other card edge interfaces include the IPMB for the AMC’s Management Module and support for two SATA II 300 ports.
- The MCP6792 uses an internal x4 PCI Express link from the x16 port of the Intel® GS45 to connect to the dual-port Gigabit Ethernet controller chip. This design feature enabl [...]


TTM Technologies (2)MicroTCA backplanes and chassis
Features (see all):
- 4U thru 12U chassis
- Single and dual-star backplanes
- IPMI fan controller
- All products are easily customized for specific requirements [...]

4U and 5U single-width AMC chassis support up-to 50 W/ slot cooling
Features (see all):
Features (see all):- 6U and 8U double-width AMC Chassis support up to 80 W/ slot cooling
- Fan trays include IPM fan controller
- Hot swap request switch, Hot swap LED, Fan Status LED, and ESD jack
- Flush or recessed chassis in 19" or ETSI rack-mount configurations w/ NEBS compliant air filtering
- Single-star backplanes with single PSU slot
- Dual-star backplanes with single or dual PSU slot(s)
- RoHS 5/6 or 6/6 compliance
- Customer ARINC40/600 configurations also available [...]

Tundra Semiconductor Corporation (1)Supports 80 Gbps aggregate bandwidth
Features (see all):

Features (see all):- Up to eight 4x mode ports or 16 1x mode ports
- Port frequency configuration to 1.25, 2.5, and 3.125 Gbaud with 8 b/10 b encoding
- Integrated high speed, full duplex SERDES with 120-200 mW per port power
- High-performance hardware multicast
- Advanced traffic management features [...]


TYCO Electronics (3)Press-Fit through-hole and surface mount configurations
Features (see all):
Features (see all):- Designed for high-speed differential pair applications (12.5+ Gbps)
- Precision formed compliant pin reduces stub effect and offers excellent retention to ensure a reliable connection
- Intermateable with Advanced Mezzanine Cards per AMC.0 [...]

24 individual 15 Amp power contacts
Features (see all):
- 72 individual high density signal contacts
- All contacts stamped and formed for cost effectiveness
- Multi-leg eye-of-needle compliant contacts for improved current distribution to PCB
- No additional mounting screws required to reduce assembly costs
- Hot-plug contact design – controls arc during hot mates/un-mate cycles [...]

Pressfit connector per MicroTCA.0 Specification
Features (see all):

Features (see all):- 170 lines
- Connector designed so that custom load patterns are easily created
- Single overmolded wafer design
- Fully validated electrical models available [...]


UlluTek (1)For applications relying on Ethernet traffic beyond what MicroTCA system or an AdvancedTCA blade could offer, UlluTek 4-port GbE AdvancedMC is the answer
Features (see all):

- The best part: we give the design away
- 4 RJ4-5 GE ports in front panel
- 1 mini USB diagnostic port in front panel
- AMC.2 GbE port 0 and 1
- Onboard GbE unmanaged switch
- IPMI
- ROHS [...]


VadaTech Inc. (5)Optically Isolated Digital Output
Features (see all):
Features (see all):- 24-channel high voltage AdvancedMC module
- 12 channels are configured as open collector sink-to-ground, 50 V@ 500 mA
- 12-channels are factory configured for +28 V (via externally supplied voltage) @ 10 mA, voltage source
- Programmable functions feature simultaneous output update on command
- I/O connectivity is via a high density rugged front panel connector
- Utilizing VadaTech’s patent pending board design, the AMC092 is available in a single-width half-height AdvancedMC form factor, which allows for higher density I/O applications
- Conformal coated board options are also available [...]

Optically isolated digital input AdvancedMC module
Features (see all):
Features (see all):- 16-channel optically isolated digital inputs
- Eight TTL/CMOS channels
- Eight 0 V to 10 V channels
- Software programmable functions include programmable debounce, programmable COS interrupts ( rising edge, falling edge, or level sensitive), and multichannel input masked interrupts
- I/O connectivity is via a high density rugged front panel connector
- Utilizing VadaTech’s patent pending board design, the AMC090 is available in a single-width half-height AdvancedMC form factor, which allows for higher density I/O applications
- AMC.0 compliant
- IPMI 2.0 compliant
- RoHs compliant
- Conformal coated option [...]

Dual channel DVI graphics processor AdvancedMC module
Features (see all):
Features (see all):- Dual channel DVI/VGA output
- Based on ATI’s M22 Mobility Radeon x300 graphics processor chipset
- 64 MB of embedded video memory
- Display resolutions up to 1920x144
- Standard DVI connector via front panel
- AMC.1 compliant
- Single-width, full-height
- Conformal coated options available [...]

AMC Packet Processor for Dual 10 GbE and/or TOE
Features (see all):

Features (see all):- AMC.1
- Single-width, mid-height (full-height option available)
- Cavium OCTEON CN56xx/CN57xx multicore
- MIPS64 Processor
- Options for 6 to 12 processor cores
- Options for 600 MHz to 1 GHz speed grade
- DDR2 with ECC memory
- Two SFP+ socket supporting 10 GbE
- PCIe x4 [...]


AMC Dual Channel DVI/VGA with HDMI Video/Audio
Features (see all):
Features (see all):- Based on ATI graphics processor chipset
- Provides two separate high-performance Dual DVI or VGA Channels
- Support of the latest high-resolution and wide-screen displays such as QXGA (2048x1536) @ 75 Hz, 2560x1600 @ 60 Hz
- 128 MB of Memory
- Analog Displays (VGA) 2048 x 1536
- Optimized for DirectX 10
- Optional “Y” adapter cable to convert the LFH connector to DVI-I connectors or VGA
- HDMI with Multi-channel 5.1 surround audio
- AMC.1 compliant
- PCIe x4 or x8 lanes
- Single-width, mid-height or full-height [...]

Viking Modular Solutions (3)Small form-factor ECC modules
Features (see all):
- For space constrained applications typically found in the communications, embedded, industrial and storage markets
- Targeted for industry standard platforms such as Blade Servers, Storage Bridge Bays (SBB), AdvancedTCA, MicroTCA, PicoTCA, Advanced Mezzanine Card (AMC) and Single Board Computers (SBCs) that require Error Correction (ECC), high density and small form-factor module solutions
- Available in a variety of densities and speeds [...]

Ultra small form-factor and rugged embedded SATA SSD
Features (see all):
- Optimized for defense, aerospace, embedded and industrial applications where there is a need for extreme environmental reliability, specifically those of shock, vibration and temperature
- Has successfully completed tests pursuant to the MIL-STD-810F
- The SATA Cube3 features a SATA II (3 Gbps), 4 channel interface, with read and write performance up to 110 MBps (Megabytes per second) and offered in densities of 4 GB to 128 GB
- Constructed with processor technology that delivers SMART command support, wear leveling and a robust ECC management engine, the SATA Cube3 is available as either a 30x32mm BGA (Ball Grid Array) solder down device or as a removable drive by using the industry standard MicroSATA connector
- The SATA Cube3 offers designers of space constrained form factors such as AdvancedTCA, MicroTCA, AMC, PMC, and XMC a SerialATA SSD with a low-volumetri [...]

The SATA Cube3 features a SATA II (3Gb/s), 4 channel interface, with read and write performance up to 110MB/s (Megabytes per second)
Features (see all):

- Offered in densities of 4GB to 128GB
- Constructed with processor technology that delivers SMART command support, wear leveling and a robust ECC management engine, the SATA Cube3 is available as either a 30x32mm BGA (Ball Grid Array) solder down device or as a removable drive by using the industry standard MicroSATA connector
- The SATA Cube3 offers designers of space constrained form factors such as AdvancedTCA, MicroTCA, AdvancedMC, PMC and XMC a SerialATA SSD with a low-volumetric density (86% smaller X-Y footprint than a 2.5" HDD/SSD) while still maintaining a high storage capacity (up to 128GB) [...]


Virtium Technology (6)LeanSTOR directly incorporates NAND flash on AMC boards; gives unprecedented freedom and space to mount additional components onto AdvancedTCA system boards
Features (see all):
Features (see all):- Free up 7" x 3" (approx.) of space on the AdvancedTCA board for more components
- Create a lighter product by eliminating the heavier solid state or hard drive case
- Improve shock and vibration performance with flash components directly on board
- Improve time to market with the completed solution, fully tested and ready for integration
- Simplify your design and procurement efforts
- Capacities available: 32 GB to 128 GB [...]

DDR3 Very Low Profile (VLP) and DDR3 Ultra Low Profile (ULP) blade memory modules for embedded computing applications
Features (see all):

- Both types of memory modules are designed with significant enhancements to the JEDEC standard, including reduced module height and densities up to 2 GB and future expansion to 4 GB
- Virtium has expanded its DDR3 VLP memory modules offering by adding DDR3 ULP RDIMM, ULP UDIMM, and ULP Mini-RDIMM form factors to its current line of DDR3 VLP SODIMM, VLP SO-RDIMM, and VLP SO-CDIMM
- Enhanced JEDEC VLP memory module standard offers VLP RDIMMs at densities up to 2 GB and future expansion to 4 GB
- ULP memory module series offers DIMM heights of 0.70", enhanced from the JEDEC standard of 0.72"
- All Virtium VLP and ULP memory modules are available using monolithic DRAM with an extended temperature range
- Suitable for rugged AdvancedTCA memory, MicroTCA memory, PicoTCA memory, and AMC memory for blade ap [...]


Memory modules with thermal heat spreader
Features (see all):
Features (see all):- Remove heat more effectively than conventional air-cooled SODIMMs
- Heat spreader available for all SODIMM product variants using mainstream 512 Mb and 1 Gb devices
- Directly address an industry-wide problem to control excessive or less-than-optimal operating temperatures in demanding embedded environments
- Offers multiple benefits including better thermal performance and improved reliability in adverse thermal environments with fewer single bit errors
- Heat-sink-equipped modules are intended for use in extended temperature ranges, thus solving thermal issues critical to system performance, and are suitable as AdvancedTCA, AdvancedMC, MicroTCA, and PicoTCA memory for blade applications and PICMG SBCs [...]

CompactFlash storage card for AdvancedTCA or MicroTCA system
Features (see all):
Features (see all):- Incorporates flash directly on the AMC board
- Free up approx. 7" x 3" on the AdvancedTCA board for more components
- Create a lighter product by eliminating the heavier solid state or hard drive case
- Improve shock and vibration performance with flash components directly on board
- Improve time to market with the complete solution
- Simplifies design and procurement efforts
- Onboard Module Management Controller [...]

DDR2 Very Low Profile (VLP) and DDR2 Ultra Low Profile (ULP) blade memory modules for blade server systems
Features (see all):
Features (see all):- Both types of memory modules are designed with significant enhancements to the JEDEC standard, including registered functionality, reduced module height, advanced cooling features, and densities up to 4 GB
- Virtium’s VLP memory modules





