Four 14-bit, 125 MSps A/D channels • Custom external clock and trigger inputs • Dual Virtex-4 FX and LX/SX FPGA architecture • QDR2 SRAM and DDR2 SDRAM • PCI-X 64-bit 133/66 MHz • Serial FPDP with optical transceivers

Embedded 8.4-inch LCD touch panel screen • Smart chassis status monitoring and control, an operating temperature of 32 °F to 131 °F • Quiet 41.6 dBA operating noise level • Lightweight 13 lbs rigid construction for both bench-top and portable test and measurement applications

Intel Core2 Duo T7500 2.2 GHz processor • Mobile Intel GME965 chipset • 4 GB 667 MHz DDR2 memory • Suitable for high-end test and measurement applications, including RF testing, sound/vibration analysis and automatic optical inspection • Mobile Intel GME965 chipset supports the latest Intel Core 2 Duo T7500 processor • 10 to 15 percent performance improvement over the GM945/T7400 configuration through faster CPU and memory clocks and greater front-side bus bandwidth • Dual Gigabit Ethernet port configuration allows the use of one GbE port for LAN connectivity and the other port for a determinative bandwidth and latency connection with LXI instruments • Suitable controller for ADLINK’s PXIS-2558T 8-slot 3U PXI chassis, which includes an embedded 8.4-inch LCD touch panel screen and features smart chassis status monitoring and control, an operating temperature of 32 ºF to 131 °F, a quiet 41.6 dBA operating noise level and a lightweight 13 lbs rigid construction for both bench-top and portable test and measurement applications

The Industrial Automation Group of Advantech introduces two new ADAM analog input modules, the ADAM-5017P and ADAM-5018P. The ADAM-5017P has eight different independent configuration channels, supports power reverse, and also has a wide uni-polar or bi-polar input range • The ADAM-5018P is a Thermocouple Input Module which supports seven input ranges and types (J,K,T,E,R,S,B), and will filter functions to remove any unreasonable range • Both will support the High Common Mode function, which means channel-to-channel differential voltages can be up to 200 VDC • Now even more measurements, such as battery or power transducer/transmitter measurements can be achieved with this new design • Furthermore, they have over-voltage protection to avoid ranges ±60 VDC that protects the modules from power surges • Also, there is built-in TVS/ESD protection to protect the high-density, miniaturization, and complex equipment • TVS diodes avoid ESD and protect the electronic components • The ADAM-5017P and ADAM-5018P are both ADAM-5550 series expansion modules which are supported by the ADAM.Net Utility • In the Facility and Machine Automation market, these modules can withstand harsh requirements and provide ideal and cost-effective options • The ADAM-5017P and ADAM-5018P modules are now available to the market • To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information

The Industrial Automation Group of Advantech introduces the EKI-2525P, which combines a compact and rugged 5-port unmanaged Ethernet switch with Power-over-Ethernet (PoE) technology, to connect and power Ethernet devices over a single cable • PoE, which is relatively new to industrial and plant-floor applications, is a technology to transmit power plus data to remote Ethernet devices over standard twisted-pair Cat5e cables • More formally known as IEEE 802.3af internationally, this standard specifies a supply of 48 VDC at up to 15.4 W per port • With combined capabilities of an unmanaged Ethernet switch and a PoE power injector, the 5 port EKI-2525P has 4 PoE ports that are capable of supplying up to 15.4 W each • Additionally, each port can automatically detect when PoE compliant devices are attached, before supplying power, allowing the use of traditional (non-PoE) Ethernet devices if needed • Packaged in a compact and thin DIN-rail mount chassis, the EKI-2525P is ideal where panel space is limited • It is also ruggedized for demanding industrial applications, with dual 12 to 48 VDC power inputs, 4,000 VDC Ethernet ESD protection, power line surge (EFT) protection of 3,000 VDC, and features an operating temperature range of -10 °C to 60 °C to ensure system uptime • Plus, these switches are CUL (UL/CSA), CE, FCC, and RoHS/WEE certified. • For ease of maintenance, each Ethernet port is equipped with front-facing LED indicators that provide link, transmission speed, activity and PoE output status to aid in diagnosing issues with cables and attached devices • With auto-MDI/MDI-X, there is no need to use crossover cables for inter-switch connections and auto-negotiation provides optimum link configurations and compatibility with legacy devices • The EKI-2525P is ideal for connecting and powering PoE devices in harsh industrial environments and is currently available • To purchase or if you have any questions, please contact Advantech at 1-800-205-7940 or your regional Advantech authorized dealer for more information

Six (6) Temperature Measurement channels- 24 Bits precision • Eight (8) 16 bits Analog / Digital channels • Input Voltage up to +/- 20 V • Each Analog input is programmable separately ±10 V, ±5 V, 0-5 V, 0-10 V • Programmable Gain from 1 to 128 • Industry Pack Module -8/32 MHz- single width

Easy-to-use software modules to add into existing applications • Low cost, high-performance solutions, • Accepts primary radar video from hardware, network or disk recording • Scan converts in real-time to one or more display windows • PPI and A-Scan display formats at resolutions up to 1920 x 1200 • Allows underlay and overlay graphics using advanced software-based rendering • Flexible toolkit that is compatible with radar processing library • Real-time fading, multi-channels, multiple colours, advanced display processing options

The flexibility of AMC technology provides application developers the ultimate flexibility in defining and allocating compute resources, telecom I/O and network connectivity • Modular design – four mid-size, single wide AdvancedMC (AMC) sites • Enables scalable and distributed computing • Mixed data plane and control application on the same blade • On-board service processor • Multiple software packages available including OS • PICMG 3.0 Gigabit Ethernet base interface • PICMG 3.1, Option 1, and 9 fabric interface support • AMC.0, AMC.1, AMC.2 compliant • Service Availability Forum (SA Forum) compliant HPI • Designed for NEBS and ETSI compliance

This scalable blade-based architecture, together with on-board interface redundancy, provides cost-effective disk capacity expansion for state-of-the-art high availability AdvancedTCA platforms • SCSI-based AdvancedTCA storage blade • RoHS (6 of 6) compliant • PICMG 3.0 compliant • Single-slot storage solution • Up to 600 GB capacity • All rear cabling • Supports SCSI bus speeds of 320 MBps (U320 LVD interface) • Carrier Grade Linux drivers included with host blades • Designed for NEBS and ETSI compliance

It has been designed from the ground up to be an economically viable solution by utilizing an injection molded plastic enclosure with the smallest number of internal components possible for low-cost high volume manufacture • The MicroTCA backplane, fans, power module, MicroTCA Carrier Hub (MCH) and a card cage are included and the system is supplied fully tested including SpiderWareM3 Platform Management software and an Emerson designed Intel Core2 Duo based processor Advanced Mezzanine Card (AdvancedMC or AMC) module to speed your time to market. MicroTCA technology will be used in a wide range of applications • Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable • Three (3) available AMC midsize expansion payload slots for application customization • Best-in-class MicroTCA Carrier Hub (MCH) and Intel Core 2 Duo processor AMC (PrAMC-7211) • Dynamic cooling for low noise enterprise deployment • Managed system supporting hot-swap of AMC modules • SpiderWareM3 Platform Management software • Fully FCC part 15 Class A certified for enterprise deployment • PICMG® MicroTCA.0 R1.0, AMC.0 R2, AMC.1, AMC.2, AMC.3 compliant • Highly robust AMC connectors stringently tested to prevent AMC insertion failure • Extensively tested system passing vigorous 48 hour stress, power cycle and boot tests • Backplane supports signaling rates up to 3.125 Gbaud/s • 48 V MicroTCA power module for full MicroTCA compatibility • OEM branded deployment options

1.06 or 1.5 GHz Intel Core2 Duo processor • 533 or 667 MHz front side bus • Intel® E7520 + 6300ESB dual channel 3.2 GBps memory controller • 2 GB ECC-protected DDR2-400 • Dual on-board Gigabit Ethernet interfaces • Support for PICMG 2.16 CompactPCI Packet Switching Backplane specification • Full PICMG 2.1, R2.0 Hot Swap specification compliance • PICMG 2.9 System Management specification support • One or two PCI mezzanine card (PMC) site • Hard disk drive accessory kits optional • Optional rear transition module in PICMG 2.16 and rear I/O variants • PLX6466 PCI-to-PCI bridge technology

As a GPP module, the KSI8560 gives networking equipment manufacturers a costeffective and powerful modular processing element with its on-board Freescale PowerQUICC III MPC8560 processor • With its add-on WAN interface, the KSI8560 provides users a high density I/O module ideal for data and signaling applications such as signaling gateways and softswitch signaling interface cards • Up to eight T1/E1/J1 interfaces are available • AMC (PICMG Advanced Mezzanine Card Base Specification) with up to 8 software selectable E1/T1/J1 interfaces • Freescale Semiconductor MPC8560 PowerQUICC III integrated communications processor • Up to 256 MB Double Data Rate (DDR) SDRAM with Error-correcting Code (ECC) • 4 MB boot flash with redundancy, and up to 1GB user flash • 16 MB Pseudo Static RAM (PSRAM) • One 100 and two 10/100/1000 Ethernet ports • PCI Express Fat Pipe • Optional front panel E1/T1/J1 interfaces • Optional rear transition modules for ATCA blades supporting E1/T1/J1 interfaces • Quality assured by over 35 years of design experience, a TL-9000 and ISO 9001:2000 certified quality management system (FM 26789)

By definition, MicroTCA is a small size and flexible standards-based form factor that is being utilized in many diverse markets – telecom, defense and aerospace, medical and industrial – each with different packaging requirements • Emerson provides some application-ready MicroTCA system platforms, and some customers will use their in-house expertise to create custom solutions based on commercial off-the-shelf (COTS) building blocks like our MCH • Full-size module designed to fit into MCH slot of MicroTCA platforms • Layer 2 unmanaged Gigabit Ethernet switching to each of 12 payload slots with front panel uplinks for external connections • Optional PCI Express switching with narrow or spread spectrum clock distribution for applications that require PCI Express capability • IPMI management functions • MicroTCA telecom clock distribution

Compact, high power-density, single-width module: dc-input module is 9 HP high, ac-input module is 12 HP high • 600 watts output power • 16 output channels, each capable of delivering 12 V @ 7.6 A payload power & 3.3 V @ 150 mA management power • Provides sufficient power for 12 AMCs, 2 MCHs & 2 CUs • Supports 1+1 input redundancy, N+1 output redundancy and hot-swap operation

processing board design that extends the basic feature of Philips LPC2131/2132/2138

Based on a 1.8 V ARM7TDMI core operating at up to 55 MHz • Integrated 64K byte flash

arsh Environment RFID Tag

Built specifically to interoperate in NAC / 802.1X enabled networks, and to integrate with the authentication control place used in 802.1X • Allow authorized employees to securely create guest accounts • Supports the concepts of time and user permissions • Optional implementation of an Acceptable Use Policy • Assists in the administration of PXE Boot and imaging systems in an authenticated network

Employs patented two-phase cooling technology (SprayCool) for use in mission critical military applications • Scalable: 4-21 slots for 6U x 160 mm VME, VPX, VXS, CompactPCI or CompactPCIe (EXP.0) electronics • High performance: 100-500 W slot with optional MIL-STD-704 power • Configurable I/O panel, power supply, accepts both COTS, proprietary cards, including air cooled cards, with minimal modifications • Tested to MIL-STD-810, MIL-STD-461 • Swap: Maximizes size, weight, and power consumption at up to 2X improvement over traditional cooled enclosures • -1,500 ft. up to 100,000 ft. including unpressurized environments, -65° C to +71° C

Industrial Communication Computer • Efficient and steady • AMD GEODE LX800 500 MHz • System memory 256 MB, 64 MB VGA Small volume with core interfaces Ethernet, 2 COM, 2 USB, VGA, Audio, PS2 (KB/Mouse), 2.5'' HDD IDE Slot • Ready to use • Embedded Linux/Win CE/XPe OS ready • System Management Utility • Application Development Environment • Modbus, Modbus/TCP

Intelligent Security - Unique hardware acceleration implements the latest set of algorithms to enable future-proof designs • Extensive Networking Interfaces - Deploy our base product with five Gigabit Ethernet ports or customize with up to three SFP Connectors • Multi-core Processors - The OCTEON CN31XXX family of Multi-core MIPS64 processors targets intelligent networking • Validated OS Partners - Work with one of our existing software partners to reduce your development time • Customized Exterior - Take advantage of Lanner's extensive industrial design experience and customize this appliance to meet your unique branding requirements

This VCO features a typical phase noise of -115 dBc/Hz @ 10 KHz offset and has excellent linearity • The model CVCO55CC-1260-1400 is packaged in the industry-standard 0.5-in. x 0.5-in. SMD package • Input voltage is 8.0 V, with a max current consumption of 35 mA • Pulling and Pushing are minimized to 0.20 MHz and 0.20 MHz/V, respectively • Second harmonic suppression is -20 dBc typical • The CVCO55CC-1260-1400 suits applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations

Provides JTAG vector testing, remote programming of FPGA logic, executable software • Jaguar can help you troubleshoot design defects and diagnose programming errors in the field • The module can be programmed to check datastream traffic, find the problem, and upload the fix all from a remote location • The unit features 20 JTAG testable loads and 1 MB of test vectors or software/firmware uploads • Optional OEM module configuration with IPMB-0

Compact 1U height form-factor with superior side-to-side cooling • 20-layer backplane that has been optimized to reduce signal integrity issues • This prototyping system includes two essential modules, including the JTAG Switch Module (JSM) and the 380 W MicroTCA Power Module • Optionally it can include high-performance: MCH, Pentium Processor AMC, and hard disk drive AMC

Designed for deployment in telecom, defense, aerospace, enterprise, and commercial applications • Integrated Ethernet switch with dual 1 GbE uplinks • Integrated PCI Express switch • Integrated MicroTCA Carrier and Shelf Managers • Front to rear, push/pull cooling • Power and cooling supports up to 40 W per mid-size, single AMC Module • AC or DC power input options • Telecom clock support • Fully compliant with MicroTCA.0, AMC.0, AMC.1, AMC.2, and AMC.3

Yamaichi’s unique connector mounting technology, CMT (Compression Mount Technology), requires less PCB inner layers • Our CN074 AdvancedMC combines our CMT and patented flexible circuit board, YFLEX • This combination reduces insertion loss and cross talk to the absolute minimum • Our CN080 complies with the MicroTCA design, having 170 contacts on 0.75 mm pitch • The CN084 fits perfectly into the aggregated AMC backplane connectors with low insertions force and is available in various combinations • We also offer a variety of 2mm hard metric connectors. Receptacle & Plug that comply with the CompactPCI backplane I/O interconnect • Yamaichi also provides AdvancedTCA and CompactPCI Power